Seagate ST240HM000, ST120HM001, ST120HM000, ST240HM001, 600 warranty Reliability specifications

Page 17

2.10RELIABILITY

2.10.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)

The product shall achieve an Annualized Failure Rate - AFR - of 0.58%. AFR and MTBF are population statistics that are not relevant to individual units.

AFR and MTBF specifications are based on the following assumptions:

8760 power-on-hours per year.

250 average power cycles per year.

Operations at nominal voltages.

Systems will provide adequate cooling to ensure the case temperatures do not exceed specification.

2.10.2 Reliability specifications

Unrecoverable read error rate during

1 LBA per 1016 bits read, max

Annualized Failure Rate (AFR)

0.58%

 

 

Power cycles

25,000 cycles

 

(at nominal voltage and temperature, with 60 cycles per hour

 

and a 50% duty cycle)

Warranty

Warranty terms are “Limited Warranty With Media Usage” [2]

 

Consult your Seagate sales representative for warranty terms

 

and conditions.

 

 

Preventive maintenance

None required.

 

 

Typical Data Retention with Power removed (at 40°C)

12 months [1]

Endurance

40GBs (max capacity) host writes per day

 

 

[1]As NAND Flash devices age with use, the capability of the media to retain a programmed value begins to deteriorate. This deterioration is affected by the number of times a particular memory cell is programmed and subsequently erased. When a device is new, it has a powered off data retention capability of up to ten years. With use the retention capability of the device is reduced. Temperature also has an effect on how long a Flash component can retain its programmed value with power removed. At high temperature the retention capabilities of the device are reduced. Data retention is not an issue with power applied to the SSD. The SSD drive contains firmware and hardware features that can monitor and refresh memory cells when power is applied.

[2]Limited Warranty With Media Usage: This warranty is based on the shorter of term and endurance usage of the drive:

36 months or 73 (max capacity) TBW whichever comes first.

SEAGATE 600 SSD PRODUCT MANUAL, REV. B

13

Image 17
Contents Seagate 600 SSD Revision Date Description of changes Document Revision HistoryContents Figures Seagate Technology Support Services About the Serial ATA Interface IntroductionSpecification Summary Tables Drive SpecificationsFormatted Capacity LBA modeDefault Logical Geometry for ATA Based Systems Interface technology PERFORMANCE, Recording and Interface TechnologyRecording technology PerformanceTime to Ready Physical CharacteristicsPower Specifications 240GB DC power requirements 120GB DC power requirements Typical 5V Startup and Operation Current Profile Typical current profilesEnvironmental Specifications Nonoperating vibration Operating vibrationElectromagnetic Immunity Radio frequency environmentsReliability Reliability specificationsAgency Certification Corrosive Environment Environmental ProtectionChina Restriction of Hazardous Substances RoHS Directive Serial ATA Cables and Connectors Handling and STATIC-DISCHARGE PrecautionsConfiguring the Drive Drive Mounting Mounting configuration dimensions 7mm modelsMounting configuration dimensions 5mm models Air flow CoolingSerial ATA Sata Interface 5 Sata Connector Plug Pinout8 Sata Connector Plug Pinout Summarizes the 1.8 drive Signal and Power Sata PlugSupported ATA commands Supported ATA CommandsCA H 3FFFH Identify Device commandFffeh Bit Word Bit Word Bit Word Smart error logging is supported Set Features command values Set Features commandA.R.T. Command 3 S.M.A.R.T. commandsSSD Percentage Endurance Remaining Indicator M.A.R.T. commandsIndex Index Index Americas Seagate Technology LLC
Related manuals
Manual 39 pages 47.54 Kb