Seagate ST1000VX000, ST2000VX000, ST3000VX000 manual Drive Specifications

Drive Specifications			www.seagate.com
Table 1 Drive specifications summary for 3TB, 2TB and 1TB models (continued)
Drive Specification	ST3000VX000	ST2000VX000	ST1000VX000
Startup current (typical) 12V	2.0A	2.0A	2.0A
(peak)
Voltage tolerance (including	5V: ±5%	5V: ±5%	5V: ±5%
noise)	12V: +10% / -7.5%	12V: +10% / -7.5%	12V: +10% / -7.5%
Ambient temperature	0° to 70°C (operating)	0° to 70°C (operating)	0° to 70°C (operating)
	–40° to 70°C (non-operating)	–40° to 70°C (non-operating)	–40° to 70°C (non-operating)
Temperature gradient	20°C per hour max (operating)	20°C per hour max (operating)	20°C per hour (operating)
	30°C per hour max (non	30°C per hour max (non-	30°C per hour (non operating)
	operating)	operating)
Relative humidity	5% to 95% (operating)	5% to 95% (operating)	5% to 95% (operating)
	5% to 95% (non-operating)	5% to 95% (non-operating)	5% to 95% (non-operating)
Relative humidity gradient	30% per hour	30% per hour	30% per hour
(max)
Wet bulb temperature (max)	37.7°C max (operating)	37.7°C (operating)	37.7°C max (operating)
	40.0°C max (non-operating)	40.0°C (non-operating)	40.0°C max (non-operating)
Altitude, operating	–304.8m to 3048m	–304.8m to 3048m	–304.8m to 3048m
	(–1000 ft to 10,000+ ft)	(–1000 ft to 10,000+ ft)	(–1000 ft to 10,000+ ft)
Altitude, non-operating	–304.8m to 12,192m	–304.8m to 12,192m	–304.8m to 12,192m
(below mean sea level, max)	(–1000 ft to 40,000+ ft)	(–1000 ft to 40,000+ ft)	(–1000 ft to 40,000+ ft)
Operational Shock (max)	80 Gs at 2ms	80 Gs at 2ms	80 Gs at 2ms
Non-Operational Shock (max)	300 Gs at 2ms	300 Gs at 2ms	350 Gs at 2ms
Vibration, operating	2Hz to 22Hz: 0.25 Gs	2Hz to 22Hz: 0.25 Gs	2Hz to 22Hz: 0.25 Gs
	(Limited displacement)	(Limited displacement)	(Limited displacement)
	22Hz to 350Hz: 0.50 Gs	22Hz to 350Hz: 0.50 Gs	22Hz to 350Hz: 0.50 Gs
	350Hz to 500Hz: 0.25 Gs	350Hz to 500Hz: 0.25 Gs	350Hz to 500Hz: 0.25 Gs
Vibration, non-operating	5Hz to 22Hz: 3.0 Gs	5Hz to 22Hz: 3.0 Gs	5Hz to 22Hz: 3.0 Gs
	22Hz to 350Hz: 3.0 Gs	22Hz to 350Hz: 3.0 Gs	22Hz to 350Hz: 3.0 Gs
	350Hz to 500Hz: 3.0 Gs	350Hz to 500Hz: 3.0 Gs	350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle**	2.4 bels (typical)	2.4 bels (typical)	2.2 bels (typical)
	2.6 bels (max)	2.6 bels (max)	2.3 bels (max)
Seek	2.6 bels (typical)	2.6 bels (typical)	2.3 bels (typical)
	2.7 bels (max)	2.7 bels (max)	2.4 bels (max)
Non-recoverable read errors	1 per 1014 bits read	1 per 1014 bits read	1 per 1014 bits read
Annualized Failure Rate (AFR)	<1%	<1%	<1%
Warranty	To determine the warranty for a specific drive, use a web browser to access the following web page:
	support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial
	number, model number (or part number) and country of purchase. The system will display the warranty
	information for your drive.
Load/Unload cycles (25°C,	300,000	300,000	300,000
50% rel. humidity)
Supports Hotplug operation	Yes	Yes	Yes
per the Serial ATA Revision 3.0
specification

*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

*** All specifications above are based on native configurations.

12 SV35 Series SATA Product Manual, Rev. C