Seagate ST3000VX000, ST1000VX000, ST2000VX000 manual Electromagnetic immunity, AFR and Warranty

Page 20

Drive Specifications

www.seagate.com

2.11 Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in Table 4.

Table 4 Radio frequency environments

Test

Description

Performance

Reference

level

standard

 

 

 

 

 

 

Electrostatic discharge

Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV

B

EN61000-4-2: 95

 

 

 

 

Radiated RF immunity

80MHz to 1,000MHz, 3 V/m,

A

EN61000-4-3: 96

 

80% AM with 1kHz sine

 

ENV50204: 95

 

900MHz, 3 V/m, 50% pulse modulation @ 200Hz

 

 

 

 

 

 

Electrical fast transient

± 1 kV on AC mains, ± 0.5 kV on external I/O

B

EN61000-4-4: 95

 

 

 

 

Surge immunity

± 1 kV differential, ± 2 kV common,

B

EN61000-4-5: 95

 

AC mains

 

 

 

 

 

 

Conducted RF immunity

150kHz to 80MHz, 3 Vrms, 80% AM with 1kHz

A

EN61000-4-6: 97

 

sine

 

 

 

 

 

 

Voltage dips, interrupts

0% open, 5 seconds

C

EN61000-4-11: 94

 

0% short, 5 seconds

C

 

 

40%, 0.10 seconds

C

 

 

70%, 0.01 seconds

B

 

 

 

 

 

2.12 AFR and Warranty

The product will achieve an Annualized Failure Rate (AFR) of <1% when operated in an environment of ambient air temperatures of 25°C. Operation at temperatures outside the specifications shown in Environmental specifications on page 18 may increase the product AFR. AFR is a population statistics that is not relevant to individual units.

AFR specifications are based on the following assumptions for consumer electronics environments:

•8760 power-on-hours per year

•10,000 average motor start/stop cycles per year

•Operations at nominal voltages

•Temperatures outside the specifications in Environmental specifications on page 18 may reduce the product reliability.

•Normal I/O duty cycle for consumer electronics environments. Operation at excessive I/O duty cycle may degrade product reliability.

The consumer electronics environment of power-on-hours, temperature, and I/O duty cycle affect the product AFR.The AFR will be degraded if used in an enterprise application.

To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.

20

SV35 Series SATA Product Manual, Rev. C

Page 19 Page 21
Image 20
Page 19 Page 21
Contents SV35 Series Document Revision History Revision Date Description of ChangeContents SV35 Series Sata Product Manual, Rev. C Figures SV35 Series Sata Product Manual, Rev. C Seagate Technology Support Services SV35 Series Sata Product Manual, Rev. C Introduction About the Sata interfaceIntroduction Drive Specifications Specification summary tablesDrive Specifications LBA mode Default logical geometryFormatted capacity Recording and interface technologyStart/stop times Physical characteristicsSeek time Power specifications Power consumptionConducted noise Voltage tolerance Power-management modesPower modes Heads Spindle Buffer Environmental specifications Ambient temperature Temperature gradientHumidity AltitudeNon-operating vibration AcousticsTest for Prominent Discrete Tones PDTs 1TB modelTest Description Performance Reference Level Standard AFR and WarrantyElectromagnetic immunity Agency certification Safety certification Electromagnetic compatibilityFCC verification Korean RRLCorrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Sata cables and connectors Handling and static-discharge precautionsConfiguring the drive Drive mounting Attaching Sata cablingMounting dimensions 1-Disk 1TB Configuring and Mounting the Drive Sata Interface Segment Pin Function DefinitionSupported ATA commands Command name Command code in hexE7H C6H Identify Device command Word Description ValueXx07H Bit Word Set Features command 3 S.M.A.R.T. commands Code in features register A.R.T. commandDAH Sata Interface Sata Interface Index SV35 Series Sata Product Manual, Rev. C SV35 Series Sata Product Manual, Rev. C Page Seagate Technology LLC Americas

ST1000VX000, ST2000VX000, ST3000VX000 specifications

Seagate's ST3000VX000, ST2000VX000, and ST1000VX000 are part of the company's SkyHawk surveillance hard drive lineup, which is engineered specifically for video surveillance systems. These drives are designed to handle the intensive workloads associated with continuous video recording in security environments, making them ideal for both commercial and residential surveillance applications.

The primary feature of these drives is their optimized performance for 24/7 operation. Each model is geared towards handling a significant amount of data, which is crucial for high-resolution video recording. The ST3000VX000 offers a substantial 3TB capacity, while the ST2000VX000 and ST1000VX000 provide 2TB and 1TB, respectively. This range of storage options allows users to select a drive that fits their specific storage needs, regardless of the scale of their surveillance system.

Another notable technology in these drives is their AllFrame technology, which supports streaming video playback by minimizing frame loss and improving overall playback reliability. This is particularly important for security applications where video integrity is paramount. AllFrame technology enhances the drive's ability to handle multiple streams of high-definition video, ensuring smooth recording and playback without interruption.

These drives are also built with Seagate's ImagePerfect firmware, which is designed to ensure clear and uninterrupted streaming on multi-camera setups. This firmware optimizes the drives for the unique demands of surveillance environments, allowing for resilience against the challenges posed by continuous workloads.

Additionally, the ST3000VX000, ST2000VX000, and ST1000VX000 are equipped with advanced vibration tolerance features. These technologies minimize the effects of vibrations from nearby drives, extending the lifespan and reliability of the drives in multi-bay NAS and surveillance environments. The drives also feature a workload rating of up to 180TB per year, signifying their capacity to endure substantial data write workloads typically associated with recording video.

Moreover, these drives come with a range of safety features, including thermal monitoring and reliability enhancements, which contribute to their durability in diverse operating conditions. With a mean time between failures (MTBF) rating of 1 million hours, they are designed to be dependable under continuous usage.

In summary, Seagate's ST3000VX000, ST2000VX000, and ST1000VX000 models represent a robust choice for surveillance needs, combining high storage capacities, advanced technologies, and reliability features tailored for video recording. These characteristics make them an excellent option for users seeking performance and durability in their security systems.
Top Page Image Contents