Seagate ST1000VM002 Reliability Annualized Failure Rate, Warranty, Electromagnetic compatibility

Page 21

www.seagate.com

Drive Specifications

2.12 Reliability - Annualized Failure Rate

The product will achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of ambient air temperatures of 25°C. Operation at temperatures outside the specifications shown in Section 2.9 may increase the product AFR. AFR is a population statistics that is not relevant to individual units.

•AFR specifications are based on the following assumptions for consumer electronics environments:

•8760 power-on-hours per year

•10,000 average motor start/stop cycles per year

•Operations at nominal voltages

•Temperatures outside the specifications in Section 2.9 may reduce the product reliability.

•Normal I/O duty cycle for consumer electronics environments. Operation at excessive I/O duty cycle may degrade product reliability.

The consumer electronics environment of power-on-hours, temperature, and I/O duty cycle affect the product AFR. The AFR will be degraded if used in an enterprise application.

2.13 Warranty

To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. Preventative maintenance: none required.

2.14 Agency certification

2.14.1 Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

2.14.2 Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN55022, Class B and the immunity levels are defined by EN55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

•Family name: Pipeline HD

•Certificate number: In process.

Pipeline HD SATA Product Manual, Rev. F

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Pipeline HD Revision Date Description of changes Document Revision HistoryContents Pipeline HD Sata Product Manual, Rev. F Figures Pipeline HD Sata Product Manual, Rev. F Seagate Technology Support Services Pipeline HD Sata Product Manual, Rev. F About the Serial ATA Interface IntroductionIntroduction Drive Specification ST2000VM003 ST1000VM002 Specification summary tablesDrive Specifications Default logical geometry LBA modeFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Typical seek times ms Read WritePower consumption Power specificationsTypical Current Profiles Power modes Heads Spindle Buffer Power-management modesConducted noise Voltage toleranceTemperature gradient Environmental specifications Drive case temperatureHumidity AltitudeVibration Operating vibrationNonoperating vibration Test for Prominent Discrete Tones PDTs AcousticsElectromagnetic immunity Model Idle Seek ST2000VM003Agency certification Safety certification WarrantyReliability Annualized Failure Rate Electromagnetic compatibilityEnvironmental protection FCC verificationChina Restriction of Hazardous Substances RoHS Directive Australian C-Tick N176Corrosive environment Drive Specifications Handling and static-discharge precautions Configuring the driveSerial ATA cables and connectors Attaching Sata cabling Drive mountingMounting dimensions 2TB model Mounting dimensions 1TB model Segment Pin Function Definition Serial ATA InterfaceSupported ATA commands Command name Command code in hexE5H EAH E7HECH E3HF4H F3HF5H F1HWord Description Value Identify Device commandXxxxH Fffeh BE01HBit Word Ultra DMA mode 6 is supported Set Features commandCode in features register A.R.T. command A.R.T. commandsEprml IndexPipeline HD Sata Product Manual, Rev. F Pipeline HD Sata Product Manual, Rev. F Pipeline HD Sata Product Manual, Rev. F Page Americas Seagate Technology LLC

ST1000VM002, ST2000VM003, 100633414 specifications

Seagate is a renowned name in the world of data storage solutions, and their hard drives like the Seagate 100633414, ST2000VM003, and ST1000VM002 exemplify the company’s commitment to reliability and performance. These drives cater to various storage needs, from personal computing to enterprise applications, and come equipped with an array of features that set them apart in a competitive market.

The Seagate 100633414 is known for its versatility and impressive storage capabilities. This hard drive can accommodate massive amounts of data, making it perfect for both personal and professional uses. One standout feature is its robust design that enhances durability and long-term reliability. Data security is prioritized, with built-in technologies that protect against sudden power loss and ensure data integrity.

Meanwhile, the ST2000VM003 model offers a remarkable balance between capacity and performance. With a storage capacity of 2TB, it is ideal for users who require ample space for videos, photos, and large applications. The drive utilizes SATA III interface technology, ensuring high data transfer speeds and reduced latency. Its 5400 RPM rotation speed provides efficient performance, particularly for tasks that involve frequent data access. Additionally, the ST2000VM003 includes advanced caching technology that significantly boosts performance, making it suitable for multimedia applications and gaming.

On the other hand, the ST1000VM002 is another impressive storage solution with a 1TB capacity. This model focuses on providing a cost-effective option without compromising on essential features. The drive is designed for standard desktop and laptop use, and it also leverages the SATA III interface, which allows for fast data retrieval and transfer rates. Its efficient design makes it an excellent choice for consumers looking to upgrade their existing storage solutions with a reliable and affordable option.

In summary, the Seagate 100633414, ST2000VM003, and ST1000VM002 drives showcase the company’s innovative technologies and their commitment to meeting diverse consumer needs. With an emphasis on durability, speed, and storage capacity, these products are tailored to enhance user experience across various applications, ensuring that both individuals and businesses can confidently store their crucial data.
Top Page Image Contents