Samsung AH68-02019S Do not use this unless necessary, Normally, Forgotten, Press the Power button

troubleshooting

SYMPTOM Check/Remedy

•The main unit is not working. • Turn off the power and hold the STOP () button on the main unit for

(Example: The power goes out or	longer than 5 seconds.
strange noise is heard.)	Using the RESET function will erase all stored settings.
• The Blu-ray Home Theater is not working	Do not use this unless necessary.
normally.
The password for rating level has been	• While (NO DISC) message appears on the display of main unit, hold the
forgotten.	main unit's STOP ( ) button for longer than 5 seconds. INITIAL
	appears on the display and all settings will return to the default values.
	• Press the POWER button.
	Using the RESET function will erase all stored settings.
	Do not use this unless necessary.
Can't receive radio broadcasts.	• Is the antenna connected properly?

•If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

While listening to TV audio through the	• If the EJECT button is pressed while listening to TV audio using the
Blu-ray Home theater system, no sound		D.IN or AUX functions, the BD/DVD functions are turned on and this mutes
is heard.		the TV audio.
The icon appears on screen.	•	The features or action cannot be completed at this time because:
		1.	The BD/DVD’s software restricts it.
		2.	The BD/DVD’s software doesn’t support the feature (e.g., angles)
		3.	The feature is not available at the moment.
		4.	You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a resolution your	•	Press the STOP ( ) utton (in front panel) for more than 5 seconds with
TV cannot support (for example, 1080p), you		no disc inside. All settings will revert to the factory settings.
may not see a picture on your TV.
No HDMI output.	•	Check the connection between the TV and the HDMI jack of the Blu-ray
		Home Theater.
	•	Check if your TV supports 480p/720p/1080i/1080p HDMI input
		resolution.
Abnormal HDMI output screen.	•	If random noise appears on the screen, it means that TV does not support
		HDCP (High-bandwidth Digital Content Protection).

66