Seagate ST3000VN000, ST2000VN000 manual FCC verification, Environmental protection, Korean RRL

Page 21

www.seagate.com

Drive Specifications

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

Family name: (NAS HDD)

Certificate number: In process

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.14.3 FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with non-certified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

Reorient the receiving antenna.

Move the device to one side or the other of the radio or TV.

Move the device farther away from the radio or TV.

Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional suggestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication number 004-000-00345-4.

2.15 Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances.

2.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive

The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS Directive.

NAS HDD Product Manual, Rev. A

21

Image 21
Contents Seagate NAS HDD Revision Date Description of Change Document Revision HistoryContents NAS HDD Product Manual, Rev. a Figures NAS HDD Product Manual, Rev. a Seagate Technology Support Services NAS HDD Product Manual, Rev. a About the Sata interface IntroductionIntroduction Specification summary tables Drive SpecificationsDrive Specifications LBA mode Default logical geometryFormatted capacity Recording and interface technology Physical characteristicsPower consumption Power specificationsSeek time Start/stop timesVoltage tolerance Conducted noiseEnvironmental specifications Power-management modesDrive case temperature Power modes Heads Spindle BufferTemperature gradient Ambient TemperatureHumidity AltitudeAcoustics Non-operating vibrationTest for Prominent Discrete Tones PDTs Electromagnetic immunityAgency certification Safety certification WarrantyReliability Mean Time Between Failure Electromagnetic compatibilityEnvironmental protection FCC verificationKorean RRL Australian C-Tick N176Corrosive environment China Restriction of Hazardous Substances RoHS DirectiveHandling and static-discharge precautions Configuring the driveSata cables and connectors Attaching Sata cabling Drive mountingSegment Pin Function Definition Sata InterfaceCommand name Command code in hex Supported ATA commandsSata Interface EFH Word Description Value Identify Device commandXx7FH Bit Word GPL feature set is supported Set Features commands Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsIndex NAS HDD Product Manual, Rev. a NAS HDD Product Manual, Rev. a Page Page Americas Seagate Technology LLC