Seagate ST3500411SV, ST2000VX002, ST31000525SV Drive specifications, Specification summary tables

2.0Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model:

ST2000VX002	ST31000526SV	ST31000525SV
ST3500411SV	ST3500410SV	ST3250311SV

2.1Specification summary tables

The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.

Table 1:	Drive specifications summary for the 2TB model
Drive specification		ST2000VX002
Formatted capacity (4K bytes/sector)*		2TB
Guaranteed sectors		3,907,029,168
Heads		6
Disks		3
Bytes per sector		4096 (512 bytes per sector emulated at the interface)
Default sectors per track		63
Default read/write heads		16
Default cylinders		16,383
Recording density(max)		1632kb/in
Track density (avg)		274 ktracks/in avg
Areal density (avg)		422 Gb/in2
Internal data transfer rate (max)		1928 Mb/s max
Sustained data transfer rate (max)		144 MB/s
I/O data-transfer rate (max)		600 MB/s
ATA data-transfer modes supported		PIO modes 0–4
		Multiword DMA modes 0–2
		Ultra DMA modes 0–6
Cache buffer		64MB
Height (max)		26.11mm (1.028 in)
Width (max)		101.6mm (4.0 in)
Length (max)		147.00mm (5.78 in)
Weight (typical)		635 grams (1.39 lb)
Power-on to ready (max)		<17s
Track-to-track seek time		<1ms typical read;
		<1.2ms typical write

SV35 Series SATA Product Manual, Rev. D 3