Seagate ST3500411SV, ST2000VX002, ST31000525SV, ST31000526SV manual Acoustics emissions

Page 23

2.9.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

2TB model

5Hz–22Hz

0.25 Gs (Limited displacement)

 

 

22Hz–350Hz

5.0 Gs

 

 

350Hz–500Hz

2.0 Gs

 

 

1TB and 500GB models

5Hz–22Hz

0.25 Gs (Limited displacement)

 

 

22Hz–350Hz

5.0 Gs

 

 

350Hz–500Hz

2.0 Gs

 

 

250GB models

5Hz–350Hz

5.0 Gs

 

 

350Hz–500Hz

1.0 Gs

 

 

2.10Acoustics emissions

Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is con- ducted at room temperature (approximately 25 degrees C). Emission levels are reported as the total A-weighted sound power levels for, steady state, idle and active (seek) modes of operations.

Table 6:

Drive A-weighted Sound Power Levels (SWL, BA)

 

 

 

 

 

 

Idle[1]

Seek

2000 GB

 

2.1 bels (typ)

2.3 bels (typ)

 

2.3 bels (max)

2.4 bels (max)

 

 

1000GB and 500GB models

2.7 bels (typ)

2.8 bels (typ)

2.9 bels (max)

3.0 bels (max)

 

 

250 GB model

2.5 bels (typ)

2.6 bels (typ)

2.8 bels (max)

2.8 bels (max)

 

 

[1]During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.

* Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

SV35 Series SATA Product Manual, Rev. D

15

Image 23
Contents SV35 Series Revision Date Sheets affected or comments Revision historyContents SV35 Series Sata Product Manual, Rev. D List of Figures Page Seagate Technology Support Services SV35 Series Sata Product Manual, Rev. D Introduction About the Serial ATA interface Drive specifications summary for the 2TB model Drive specificationsSpecification summary tables Access the following web Drive specification ST31000526SV ST31000525SV Drive specifications summary for the 1TB modelsDrive specification ST3500411SV ST3500410SV ST3250311SV Drive specifications summary for 500GB and 250GB modelsDrive specifications summary for 500GB and 250GB models Recording and interface technology Default logical geometryLBA mode Formatted capacityStart/stop times Physical characteristicsSeek time Power specifications Typical Current Profiles Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications Disk model Nonoperating shock Disk modelsVibration Operating vibrationAcoustics emissions Agency certification WarrantyElectromagnetic immunity FCC verification Australian C-Tick N176China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Serial ATA cables and connectors Configuring and mounting the driveHandling and static-discharge precautions Configuring the driveAttaching Sata cabling Drive mountingMounting dimensions 2TB and 1TB Mounting dimensions 500GB and 250GB Hot-Plug compatibility Serial ATA Sata interfaceSegment Pin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalCommand name Command code in hex Supported ATA commandsSupported ATA commands F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSV35 Series Sata Product Manual, Rev. D Set Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsM.A.R.T. commands Index RRL Page SV35 Series Sata Product Manual, Rev. D Page Seagate Technology LLC
Related manuals
Manual 46 pages 61.18 Kb

ST3500411SV, ST31000526SV, ST2000VX002, ST31000525SV specifications

Seagate, a stalwart name in the data storage industry, offers a range of hard disk drives that cater to various needs and applications. Three notable models are the ST3250311SV, ST3500410SV, and ST31000525SV, each designed with unique characteristics and features suitable for diverse environments, from personal computing to enterprise storage solutions.

The ST3250311SV is a 250GB SATA drive that operates at 7200 RPM, providing a solid balance of performance and capacity. One of its main features is its 8MB cache, which enhances read and write speeds, making it suitable for high-demand applications like gaming and multimedia. The drive is also designed with Seagate's advanced data protection technologies, including an intelligent error recovery system that serves to minimize data loss and increase reliability during operation.

Next in line, the ST3500410SV offers a larger capacity of 500GB, making it an excellent choice for users who require more storage. Like its counterpart, it operates at 7200 RPM but is equipped with a 16MB cache for even better performance. The drive is built on Seagate's perpendicular recording technology, which increases storage density and improves data integrity. The ST3500410SV is particularly well-suited for server environments, where reliability and speed are critical. Its advanced power management features help reduce energy consumption, making it a more eco-friendly option for data centers.

Finally, the ST31000525SV provides an impressive 1TB of storage capacity, leveraging the same 7200 RPM speed and 32MB cache as its predecessors. This model exemplifies Seagate's focus on enhancing user experiences with greater storage and quicker access times, fulfilling the demands of both consumer and enterprise markets. With features like S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), this drive helps users keep tabs on their drive's health and performance, anticipating potential failures and ensuring data security.

In summary, the Seagate ST3250311SV, ST3500410SV, and ST31000525SV drives showcase a range of capacities and features aimed at meeting the needs of today’s data-driven world. From gaming and personal use to demanding enterprise applications, these hard drives combine speed, reliability, and advanced technologies to deliver outstanding performance and data protection. Their robust design and efficient power management reinforce Seagate's commitment to innovation and sustainability in data storage solutions.