Seagate ST2000DL003 Test for Prominent Discrete Tones PDTs, Electromagnetic immunity, Standard

Page 20

Drive Specifications

www.seagate.com

2.10.1 Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-

7)to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.

2.11 Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 4 Radio frequency environments

Test

Description

Performance

Reference

Level

standard

 

 

 

 

 

 

Electrostatic

Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV

B

EN61000-4-2: 95

discharge

 

 

 

 

 

 

 

 

 

 

80MHz to 1,000MHz, 3 V/m,

A

EN61000-4-3: 96

Radiated RF

80% AM with 1kHz sine

 

ENV 50204: 95

immunity

900MHz, 3 V/m, 50% pulse modulation @

 

 

 

200Hz

 

 

 

 

 

 

Electrical fast

± 1 kV on AC mains, ± 0.5 kV on external I/O

B

EN61000-4-4: 95

transient

 

 

 

 

 

 

 

 

 

Surge

± 1 kV differential, ± 2 kV common, AC mains

B

EN61000-4-5: 95

immunity

 

 

 

 

 

 

 

 

 

Conducted RF

150kHz to 80MHz, 3 Vrms, 80% AM with 1kHz

A

EN61000-4-6: 97

immunity

sine

 

 

 

 

 

 

 

0% open, 5 seconds

C

EN61000-4-11: 94

Voltage dips,

0% short, 5 seconds

C

 

interrupts

40%, 0.10 seconds

C

 

 

70%, 0.01 seconds

B

 

 

 

 

 

2.12 Reliability

2.12.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)

The product shall achieve an Annualized Failure Rate (AFR) of 0.34% (MTBF of 0.75 million hours) when operated in an environment of ambient air temperatures of 25°C. Operation at temperatures outside the specifications in Section 2.9 may increase the product AFR (decrease MTBF). AFR and MTBF are population statistics that are not relevant to individual units.

AFR and MTBF specifications are based on the following assumptions for desktop personal computer environments:

2400 power-on-hours per year.

10,000 average motor start/stop cycles per year.

Operations at nominal voltages.

Temperatures outside the specifications in Section 2.9 may reduce the product reliability.

Normal I/O duty cycle for desktop personal computers. Operation at excessive I/O duty cycle may degrade product reliability.

20

Barracuda Green SATA Product Manual, Rev. D

Image 20
Contents Barracuda Green 100649225 Rev. D JuneDocument Revision History Revision Date Description of changesContents Barracuda Green Sata Product Manual, Rev. D Figures Barracuda Green Sata Product Manual, Rev. D Seagate Technology Support Services Barracuda Green Sata Product Manual, Rev. D Introduction About the Serial ATA InterfaceIntroduction Specification summary tables Drive specification ST2000DL003 ST1500DL003Drive Specifications Formatted capacity LBA modeDefault logical geometry Physical characteristics Recording and interface technologySeek time Interface Serial ATA SataPower specifications Power consumptionSpinup power Start/stop timesTypical Current Profiles Voltage tolerance Power-management modesConducted noise Environmental specifications Ambient temperature Temperature gradientHumidity AltitudeVibration AcousticsTest for Prominent Discrete Tones PDTs Electromagnetic immunityTest Description Performance Reference StandardWarranty Agency certification Safety certificationElectromagnetic compatibility Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Barracuda Green Sata Product Manual, Rev. D Serial ATA cables and connectors Handling and static-discharge precautionsConfiguring the drive Drive mounting Attaching Sata cablingMounting dimensions 2000 and 1500GB models Barracuda Green Sata Product Manual, Rev. D Segment Pin Function Definition Ground 2nd mate Differential signal pair a from PHYGround 2nd mate Differential signal pair B from PHY E5H Supported ATA commandsCommand name Command code in hex E7H EAHECH E3HF2H EFHF9H C6HIdentify Device command Word Description Value0C5AH AsciiNumber of current logical heads Number of current logical sectors per logical track57-58 Current capacity in sectors Number of sectors transferred during a Read MultipleHardware reset value BE01HFffeh 160-254 ATA-reserved 0000H 255 Integrity word XxA5HMultiword DMA mode 2 is currently active Smart error login is supportedMedia Card Pass Through Command feature set is supported Streaming feature set is supportedSet Features command Enable read look-ahead read cache feature defaultAAH Report full capacity available3 S.M.A.R.T. commands Code in features register A.R.T. commandSerial ATA Interface Serial ATA Interface Index Barracuda Green Sata Product Manual, Rev. D Barracuda Green Sata Product Manual, Rev. D Barracuda Green Sata Product Manual, Rev. D Page Seagate Technology LLC ASIA/PACIFIC
Related manuals
Manual 42 pages 49.86 Kb