www.seagate.com | Serial ATA Interface | |||
Table 7 Identify Device commands (Continued) |
|
| ||
|
|
|
| |
Word | Description | Value |
| |
|
|
|
| |
86 | Command sets enabled | BE01H |
| |
|
|
|
| |
87 | Command sets enable extension | 4123H |
| |
|
|
|
| |
88 | Ultra DMA support and current mode (see note following this | xx7FH |
| |
| table) |
|
| |
|
|
|
| |
89 | Security erase time | 00A9H |
| |
90 | Enhanced security erase time | 00A9H |
| |
|
|
|
| |
92 | Master password revision code | FFFEH |
| |
|
|
|
| |
93 | Hardware reset value | xxxxH |
| |
0000H |
| |||
|
|
|
| |
Total number of |
|
| ||
| Section 2.2 for related information). These words are required for | ST2000DL003 = 3,907,029,168 |
| |
| drives that support the |
| ||
| ST1500DL003 = 2,930,277,168 |
| ||
| value: 0000FFFFFFFFFFFFh. |
| ||
|
|
| ||
|
|
|
| |
0000H |
| |||
The mandatory value of the world wide name (WWN) for the | Each drive will have a unique |
| ||
| drive. NOTE: This field is valid if word 84, bit 8 is set to 1 | value. |
| |
| indicating |
|
| |
|
|
|
| |
0000H |
| |||
128 | Security status | 0001H |
| |
|
|
|
| |
xxxxH |
| |||
|
|
|
| |
|
| 0000H |
| |
255 | Integrity word | xxA5H |
| |
|
|
|
| |
Note |
| Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not | ||
| supported. |
|
| |
|
|
|
| |
Note |
| See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. |
| |
|
|
|
|
|
Table 8 Bit Descriptions
Description (if bit is set to 1)
Bit | Word 63 |
0Multiword DMA mode 0 is supported.
1Multiword DMA mode 1 is supported.
2Multiword DMA mode 2 is supported.
8Multiword DMA mode 0 is currently active.
9Multiword DMA mode 1 is currently active.
Barracuda Green SATA Product Manual, Rev. D | 35 |