Seagate ST31000340NS, ST3250310NS manual Power-management modes, Active mode, Idle mode, Sleep mode

Page 20

2.8.4Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:

Power modes

Heads

Spindle

Buffer

 

 

 

 

Active

Tracking

Rotating

Enabled

 

 

 

 

Idle

Tracking

Rotating

Enabled

 

 

 

 

Standby

Parked

Stopped

Enabled

 

 

 

 

Sleep

Parked

Stopped

Disabled

 

 

 

 

•Active mode

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

14

Barracuda ES.2 Serial ATA Product Manual, Rev. A

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Barracuda ES.2 Serial ATA ST31000340NSST3500320NS ST3750330NSST3250310NSRevision history Revision DateContents Barracuda ES.2 Serial ATA Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specification ST31000340NS ST3750330NS Barracuda ES.2 Serial ATA Product Manual, Rev. a Drive specifications summary for 500 GB and 250 GB models Drive specification ST3500320NS ST3250310NSBarracuda ES.2 Serial ATA Product Manual, Rev. a Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,3831000GB 750GB 500GB 250GB Physical characteristicsRecording and interface technology Typical seek times msec Read Write Seek timeStart/stop times Power specifications Typical current profiles Typical 5V startup and operation current profileConducted noise Voltage tolerancePower-management modes Active modeIdle mode Sleep modeEnvironmental specifications Nonoperating vibration VibrationOperating vibration Acoustics Electromagnetic immunityFluid Dynamic Bearing FDB motor acoustics Radio frequency environmentsSafety certification ReliabilityAgency certification Electromagnetic compatibilityFCC verification Korean RRLAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Page Barracuda ES.2 Serial ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingBarracuda ES.2 Serial ATA Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H 129 Seagate-reserved Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support InternetPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Publication feedback survey Barracuda ES.2 Serial ATA Product Manual, Rev. a Index ITE Page Barracuda ES.2 Serial ATA Product Manual, Rev. a Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 2 pages 18.11 Kb

ST3750330NS, ST31000340NS, ST3250310NS, ST3500320NS specifications

Seagate has long been a leader in the hard drive market, providing various storage solutions for personal and enterprise needs. Among its notable models are the ST3500320NS, ST3320630NS, ST3250310NS, and ST3750330NS, tailored for different applications, particularly in data center environments.

The Seagate ST3500320NS is a 500GB SATA hard drive designed for high-performance computing. One of its key features is a spindle speed of 7200 RPM, which offers quick data access times, significantly reducing latency in read and write operations. This model supports a 3Gb/s SATA interface, ensuring compatibility with a wide range of systems. Another important characteristic of the ST3500320NS is its robust error recovery mechanism, which enhances data integrity, making it suitable for applications where data precision is critical.

The ST3320630NS, on the other hand, is a 320GB variant, also featuring a 7200 RPM spindle speed. This model includes advanced power management features, allowing for reduced energy consumption without sacrificing performance. The drive's design focuses on reliability, designed to handle the demands of continuous operation in RAID configurations or as part of a network-attached storage (NAS) solution. Its dual stage actuator technology ensures more precise positioning of the read/write heads, improving overall performance and durability.

Considered an entry-level model, the ST3250310NS boasts a capacity of 250GB and shares the 7200 RPM speed common to other models. This drive is tailored for cost-effective solutions, providing a balance of price, performance, and reliability for small to medium business environments. Its resilience to shock and vibration makes it suitable for use in mobile workstations and external drives.

Lastly, the ST3750330NS features a significant 750GB capacity while maintaining the same 7200 RPM speed. It offers enhanced caching capabilities with a 32MB buffer, improving data throughput and responsiveness. Designed for high-capacity storage needs, this model is optimized for streaming applications and heavy workloads, reinforcing Seagate's commitment to delivering good performance in demanding scenarios.

All these models embody Seagate's dedication to innovation and reliability, featuring technologies such as Native Command Queuing (NCQ) and S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) to monitor drive health. With years of expertise, Seagate continues to set industry standards for storage solutions, making these models ideal for a variety of professional applications.
Top Page Image Contents