Seagate ST3750330NS, ST31000340NS, ST3250310NS Environmental protection, Corrosive environment

Page 26

2.14Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances.

2.14.1European Union Restriction of Hazardous Substances (RoHS) Directive

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. A new law, the European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS Directive.

2.14.2China Restriction of Hazardous Substances (RoHS) Directive

2.14.2中国限制危险物品的指令

This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard.

"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard.

“O"表示该部件（于同类物品程度上）所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。

"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the China RoHS MCV Standard.

“X "表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。

2.15Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate every potential application environment. Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chlo- ride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or

20

Barracuda ES.2 Serial ATA Product Manual, Rev. A

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Barracuda ES.2 Serial ATA ST31000340NSST3500320NS ST3750330NSST3250310NSRevision history Revision DateContents Barracuda ES.2 Serial ATA Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specification ST31000340NS ST3750330NS Barracuda ES.2 Serial ATA Product Manual, Rev. a Drive specifications summary for 500 GB and 250 GB models Drive specification ST3500320NS ST3250310NSBarracuda ES.2 Serial ATA Product Manual, Rev. a Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,3831000GB 750GB 500GB 250GB Physical characteristicsRecording and interface technology Typical seek times msec Read Write Seek timeStart/stop times Power specifications Typical current profiles Typical 5V startup and operation current profileConducted noise Voltage toleranceIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Nonoperating vibration VibrationOperating vibration Fluid Dynamic Bearing FDB motor acoustics AcousticsElectromagnetic immunity Radio frequency environmentsAgency certification Safety certificationReliability Electromagnetic compatibilityFCC verification Korean RRLAustralian C-Tick N176 China Restriction of Hazardous Substances RoHS Directive Environmental protectionCorrosive environment Page Barracuda ES.2 Serial ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingBarracuda ES.2 Serial ATA Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H 129 Seagate-reserved Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support InternetPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Publication feedback survey Barracuda ES.2 Serial ATA Product Manual, Rev. a Index ITE Page Barracuda ES.2 Serial ATA Product Manual, Rev. a Page Disc Drive, Scotts Valley, California 95066-4544, USA
Related manuals
Manual 2 pages 18.11 Kb

ST3750330NS, ST31000340NS, ST3250310NS, ST3500320NS specifications

Seagate has long been a leader in the hard drive market, providing various storage solutions for personal and enterprise needs. Among its notable models are the ST3500320NS, ST3320630NS, ST3250310NS, and ST3750330NS, tailored for different applications, particularly in data center environments.

The Seagate ST3500320NS is a 500GB SATA hard drive designed for high-performance computing. One of its key features is a spindle speed of 7200 RPM, which offers quick data access times, significantly reducing latency in read and write operations. This model supports a 3Gb/s SATA interface, ensuring compatibility with a wide range of systems. Another important characteristic of the ST3500320NS is its robust error recovery mechanism, which enhances data integrity, making it suitable for applications where data precision is critical.

The ST3320630NS, on the other hand, is a 320GB variant, also featuring a 7200 RPM spindle speed. This model includes advanced power management features, allowing for reduced energy consumption without sacrificing performance. The drive's design focuses on reliability, designed to handle the demands of continuous operation in RAID configurations or as part of a network-attached storage (NAS) solution. Its dual stage actuator technology ensures more precise positioning of the read/write heads, improving overall performance and durability.

Considered an entry-level model, the ST3250310NS boasts a capacity of 250GB and shares the 7200 RPM speed common to other models. This drive is tailored for cost-effective solutions, providing a balance of price, performance, and reliability for small to medium business environments. Its resilience to shock and vibration makes it suitable for use in mobile workstations and external drives.

Lastly, the ST3750330NS features a significant 750GB capacity while maintaining the same 7200 RPM speed. It offers enhanced caching capabilities with a 32MB buffer, improving data throughput and responsiveness. Designed for high-capacity storage needs, this model is optimized for streaming applications and heavy workloads, reinforcing Seagate's commitment to delivering good performance in demanding scenarios.

All these models embody Seagate's dedication to innovation and reliability, featuring technologies such as Native Command Queuing (NCQ) and S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) to monitor drive health. With years of expertise, Seagate continues to set industry standards for storage solutions, making these models ideal for a variety of professional applications.
Top Page Image Contents