Seagate ST9160312AS, ST9320322AS manual Reliability, Agency certification, Safety certification

Page 22

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

<0.48%

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

Important: When returning a drive for warranty support, if possible, you should

 

 

provide the valid ATA Master password, or return the drive in the Security Erased

 

 

state with the User Data Area accessible.

 

 

If these recommendations are not followed, Seagate cannot access the drive to

 

 

perform failure analysis to verify your warranty claim.

 

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to pro-

 

 

vide the drive serial number, model number (or part number) and country of pur-

 

 

chase. The system will display the warranty information for your drive.

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

16

Momentus 5400 FDE.3 SATA Product Manual, Rev. A

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Momentus 5400 FDE.3 Sata ST9320322AS ST9160312AS ST9120312ASPage Contents Serial ATA interface Seagate Technology support servicesCompatibility summary List of Figures Page Introduction System requirementsAbout Momentus 5400 FDE.3 Sata disc drives Security feature matrixFDE drive feature list FDE benefitsDrive state upon shipment Momentus 5400 FDE.3 Sata Product Manual, Rev. a Drive specifications Specification summary tableSystem will display the warranty information for your drive Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times msec Read Seek timeStart/stop times Time to ready Typical Max @ 25CPower specifications Conducted noise Typical current profileDeferred spinup Voltage toleranceActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Nonoperating shock ShockOperating shock VibrationTest for Prominent Discrete Tones PDTs AcousticsElectromagnetic immunity Idle Performance seekReliability Safety certificationMeasurement type Specification Agency certificationAustralian C-Tick N176 Korean RRLFCC verification European Union Restriction of Hazardous Substances RoHS Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions Drive mountingDrive integration Momentus 5400 FDE.3 Sata drive label exampleSecure Erase procedure Security Erase--ATA security commandsDrive installation Consumer usageDrive State after Secure Erase Serial ATA interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionATA Security policy exceptions Pin Function DefinitionWord Content ATA Security Erase Unit bitsDriveTrust Identify DriveTrust Mode supportIdent Value BIT set Bit Description Full Disc Encryption support Full Disc Encryption IdentifySupported commands Supported ATA commandsNormal Commands Read LOG EXT SET MAX Freeze Lock Code Command Locked Unlocked Frozen ATA Security API DriveTrust Security APIIdentify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesM.A.R.T. commands 7 S.M.A.R.T. commandsCode in features register A.R.T. command Bios versions tested in ATA Security mode Installation considerationsSystem Compatibility using WIndows XP SP2 Tested Bios versions with Windows XP SP2AMD Phoenix Award Dell AMI VVPGI635 DriveTrust compatibility verification Bios DriveTrust compatibilityTian YI F30A ATA ICH8M HP-BPC Supported operating systems Compatibility test configurationsOperating system versions tested Manufacturer Version/ReleasePresales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE TPI Momentus 5400 FDE.3 Sata Product Manual, Rev. a Page Seagate Technology LLC

ST9120312AS, ST9160312AS, ST9320322AS specifications

The Seagate ST9320322AS, ST9160312AS, and ST9120312AS are hard disk drives (HDDs) designed for reliable storage solutions in various computing environments. These drives belong to the Barracuda line, known for their high performance and robust features.

The ST9320322AS is a 320GB, 2.5-inch SATA hard drive that operates at a speed of 7200 RPM. It has a 16MB cache buffer, enhancing data access speeds and allowing for efficient multi-tasking. This drive is particularly suitable for laptops, external drives, and other applications requiring high-capacity storage paired with portability. Its low power consumption makes it an ideal choice for mobile systems, contributing to longer battery life.

On the other hand, the ST9160312AS is a 160GB version, also a 2.5-inch SATA HDD running at 7200 RPM. Like the ST9320322AS, it features a 16MB cache, which optimizes performance for everyday computing tasks. This model is often utilized in gaming consoles and entry-level laptops, offering a balance of performance and affordability. With a height of only 9.5mm, it is designed to fit in ultrathin laptops while providing ample storage space for user data, applications, and multimedia files.

The ST9120312AS further reduces storage capacity to 120GB, while maintaining the same rotational speed of 7200 RPM. This HDD is designed for users looking for reliable, cost-effective storage solutions without compromising on performance. Like its counterparts, it features a 16MB cache and operates efficiently, making it suitable for applications that require moderate data storage, such as basic computing tasks and media storage.

All three models leverage Seagate’s advanced recording technology, which enhances data integrity and reliability. They also incorporate sophisticated error recovery tools that help prevent data loss, ensuring longevity and durability under various operating conditions. These drives support the SATA interface, which provides high-speed data transfer rates, making them compatible with a wide range of computing devices.

In conclusion, the Seagate ST9320322AS, ST9160312AS, and ST9120312AS hard drives represent a strong selection for users in need of reliable, efficient, and compact storage solutions. With their combination of high performance, energy efficiency, and advanced technologies, they continue to serve a vital role in modern computing architectures.
Top Page Image Contents