Listening to Radio
Presetting Stations | GB |
|
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1Press the TUNER button and select the FM band.
2 Tune in to the desired station.
1Press the TUNER button and select the FM band.
2 Press TUNING/CH
to select "89.10".
3 Press the TUNER MEMORY button.
Main Unit
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold TUNING/CH to automatically search for active broadcasting stations.
Briefly press TUNING/CH to increase or decrease the frequency incrementally.
•Refer to Step 2 on page 61 to automatically or manually tune in to a station.
•“PRGM” flashes in the display.
1Press the FUNCTION button to select the FM band.
2 Select a broadcast station.
| Press the STOP ( |
| ) | |||
Automatic Tuning 1 |
| |||||
| ||||||
| button to select |
|
| |||
|
|
| ||||
PRESET and then press |
|
|
|
| ||
|
|
|
| |||
button to select the preset station. | ||||||
| Press the STOP ( |
| ) | |||
Automatic Tuning 2 | ||||||
| ||||||
| button to select "MANUAL" | |||||
| ||||||
and then press and hold 
button to automatically search the band.
Manual Tuning Press STOP (
) to select MANUAL and then briefly
press | to tune in to a lower or |
higher frequency.
4 Press 
to select preset number.
•You can select between 1 and 15 presels.
Note | • This unit does not receive |
| AM broadcasts. |
5 |
| Press the TUNER | To | preset another |
| MEMORY button | 6 station, repeat steps | ||
|
| again. | 2 to 5. | |
|
|
|
|
|
•Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and the station is stored in memory.
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
61 | • Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press 
on the remote control to select a channel.
62