Samsung 20041112182436906 Connecting your System to the Power Supply, Button Function

P.SCAN(Progressive Scan) Function

Supports the Progressive scan system, as well as the conventional (current) Interlace scan system. *To enjoy the progressive video picture, you must connect the unit to a television or monitor that supports the progressive video input.

GB

While the player is in the stop mode, hold the P.SCAN button down for longer than 1 second.

• The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held down for a minimum of 1 second.

•The previous mode is indicated in the display first, followed by the selected mode in about a second.

P.Scan Adj (Progressive Scan Adjusting)

This function allows you to optimize the picture quality when it becomes poor due to screen distortion or discs containing erroneous data.

Press the Setup/P .Adj button. (Play mode only)

•Each time the Setup/P .Adj button is pressed, the following appears on the TV screen:

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

In interlaced-scan video, a frame consists of two	The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field	video consecutively down the screen, line by line.
contains every other horizontal line in the frame.	As opposed to the interlaced scanning process by which a
The old field of alternating lines is displayed first, and	video image is drawn in a series of passes, you get an
then the even field is displayed to fill in the alternating	entire image drawn at one time.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains	with moving objects. A camera that has the ability to
two interfaced fields, thus a total of 60 fields are	capture moving objects is called a "full frame shutter
displayed every 1/60th of a second each.	camera".
The interlaced scanning method is intended for capturing
a still object.

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.

User instructions may vary depending on the type of disc. Read the instructions carefully before use.

	1	2	3	GB
	Turn on the power	Select a video mode by	Press the DVD button
Prepa-	to your DVD player	pressing the TV/VIDEO	to select the DVD input
rations	and TV.	button.	function.
before	TV	TV/VIDEO	DVD
use

• The “WAIT” message that appears on the display for about seven to eight seconds when turning on the power or selecting a DVD function indicates a stabilization period for optimizing the condition of your DVD player. While the message is being displayed, other buttons remain inactive.

•When the power is not turned on, press down the Stop ( ) button on the main unit for over 5 seconds.

The product will be initialized to its optimum state.

•Certain operational features such as the Speaker mode, Test tone, Volume, etc. will not be displayed on the TV screen.

•If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 30.

TV Broadcast System

•This device is designed to work with the NTSC video format.

•For normal playback, the video format a DVD disc is recorded in must coincide with your TV's video format.

Connecting your System to the Power Supply

The AC plug must be plugged into an appropriate socket.

Before plugging your system into an AC outlet, you must check the voltage.

1.Plug the AC Cord on the rear of the system into an appropriate outlet.

2.Press the On/Standby button to switch your DVD Player system on.

• This function only works with TV's equipped with component video inputs (Y, Pr, Pb).

•Depending on the brand and model of your TV, this function may not work.

13

14