Seagate ST3500830SCE, ST3250820SCE, ST3300820SCE, ST3750640SCE, ST3750840SCE manual Following web

Page 13

Drive specification

ST3500830SCE

 

ST3400820SCE

 

 

 

 

Vibration, nonoperating

5–22 Hz: 0.25 Gs, Limited displacement

 

 

22–350 Hz: 5.0 Gs

 

 

350–500 Hz:: 1.0 Gs

 

 

 

 

 

Drive acoustics, sound power

 

 

 

 

 

 

Idle**

2.8 bels (typical)

 

2.7 bels (typical)

 

3.0 bels (max)

 

2.9 bels (max)

CE seek profile

3.0 bels (typical)

 

2.9 bels (typical)

 

3.1 bels (max)

 

3.0 bels (max)

 

 

 

 

Nonrecoverable read errors

1 per 1014 bits read

 

 

Annualized Failure Rate (AFR)

0.68%

 

 

 

 

 

Warranty

5 years on distribution units.

 

 

To determine the warranty for a specific drive, use a web browser to access

 

the following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to

 

provide the drive serial number, model number (or part number) and country

 

of purchase. The system will display the warranty information for your drive.

 

 

 

 

Contact start-stop cycles (25°C, 50% rel. humidity)

50,000

 

 

 

 

 

Supports Hotplug operation per Serial ATA Revision

Yes

 

2.5 specification

 

 

 

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

DB35.3 Series Serial ATA Product Manual, Rev. D

7

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DB35.3 Series Serial ATA Revision Date Sheets affected or comments Revision historyContents DB35.3 Series Serial ATA Product Manual, Rev. D List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST3750640SCE ST3750840SCE Drive specifications summary for 750 Gbyte modelsDB35.3 Series Serial ATA Product Manual, Rev. D Drive specification ST3500830SCE ST3400820SCE Drive specifications summary for 500 and 400 Gbyte modelsFollowing web Drive specification ST3320820SCE ST3300820SCE Drive specifications summary for 320 and 300 Gbyte modelsDB35.3 Series Serial ATA Product Manual, Rev. D Drive specification ST3250820SCE Drive specifications summary for 250 Gbyte modelsInformation for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Drive specification Physical characteristicsRecording and interface technology 750GB 500GB 400GB 320GB 300GB 250GBSeek time Power specificationsStart/stop times Idle mode power Operating power and currentStandby mode DC power requirementsActive mode Power-management modesPower modes Heads Spindle Buffer Conducted noiseSleep mode Idle modeIdle and Standby timers Environmental specifications 4 Disc models Nonoperating shock Disc modelsVibration Operating vibrationFluid Dynamic Bearing FDB motor acoustics AcousticsIdle CE seek profile Reliability Electromagnetic immunityAgency certification Australian C-Tick N176 Korean RRLFCC verification RoHS MCV Environmental protectionPage Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewDB35.3 Series Serial ATA Product Manual, Rev. D Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H 159 160 ATA-reserved 0000H 254 255 Integrity word XxA5H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support InternetTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Sata DB35.3 Series Serial ATA Product Manual, Rev. D Page Seagate Technology LLC

ST3400820SCE, ST3300820SCE, ST3750840SCE, ST3250820SCE, ST3750640SCE specifications

Seagate’s series of hard drives, including the ST3320820SCE, ST3500830SCE, ST3750640SCE, ST3250820SCE, and ST3750840SCE, comprise a robust lineup designed for both consumer and professional use.

The ST3320820SCE model features a storage capacity of 320GB and operates at a rotational speed of 7200 RPM, allowing for faster data access and improved overall performance. This drive is equipped with SATA interface, providing higher data transfer rates and enhanced connectivity options. Its 8MB cache enhances read and write speeds, thus making it suitable for multitasking environments.

In comparison, the ST3500830SCE offers a larger capacity with 500GB storage. This drive is also based on the same 7200 RPM speed standard, ensuring optimal performance for both gaming applications and data-heavy tasks. The SATA interface remains a central feature, promoting seamless integration into a range of PC configurations.

The ST3750640SCE takes the storage capabilities further, offering a generous 750GB space. It shares similar technological advancements such as the SATA interface and 7200 RPM speed, making it ideal for users needing extensive storage for multimedia files, software applications, and backups. The reliable performance alongside its increased capacity makes it a favored choice among professionals.

The ST3250820SCE model is targeted towards those needing a balance between performance and cost-efficiency. With a 250GB capacity, this drive provides ample space for everyday usage while maintaining a robust 7200 RPM speed and 8MB cache. This makes it an ideal option for entry-level systems and general-purpose computing.

Lastly, the ST3750840SCE offers up to 750GB of space, similar to the ST3750640SCE, but also incorporates advanced technologies for enhanced reliability and durability. This includes features like Seagate's Smart Align technology, which optimizes the drive's performance by efficiently managing data, especially with modern 4K sector drives.

Overall, these Seagate models cater to a wide spectrum of users, from casual home users to professionals requiring reliable and high-performance storage solutions. With a combination of speed, capacity, and innovative technologies, they stand out as solid choices in the hard drive market.
Top Page Image Contents