Seagate ST3300820SCE, ST3250820SCE, ST3750640SCE, ST3750840SCE manual Set Features command values

Page 43

4.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 10: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

 

46H

Ultra DMA mode 6

10H

Enable use of SATA features

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

90H

Disable use of SATA features

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

DB35.3 Series Serial ATA Product Manual, Rev. D

37

Page 42 Page 44
Image 43
Page 42 Page 44
Contents DB35.3 Series Serial ATA Revision Date Sheets affected or comments Revision historyContents DB35.3 Series Serial ATA Product Manual, Rev. D List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST3750640SCE ST3750840SCE Drive specifications summary for 750 Gbyte modelsDB35.3 Series Serial ATA Product Manual, Rev. D Drive specification ST3500830SCE ST3400820SCE Drive specifications summary for 500 and 400 Gbyte modelsFollowing web Drive specification ST3320820SCE ST3300820SCE Drive specifications summary for 320 and 300 Gbyte modelsDB35.3 Series Serial ATA Product Manual, Rev. D Drive specification ST3250820SCE Drive specifications summary for 250 Gbyte modelsInformation for your drive Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacity750GB 500GB 400GB 320GB 300GB 250GB Physical characteristicsDrive specification Recording and interface technologySeek time Power specificationsStart/stop times DC power requirements Operating power and currentIdle mode power Standby modeConducted noise Power-management modesActive mode Power modes Heads Spindle BufferSleep mode Idle modeIdle and Standby timers Environmental specifications Operating vibration Nonoperating shock Disc models4 Disc models VibrationFluid Dynamic Bearing FDB motor acoustics AcousticsIdle CE seek profile Reliability Electromagnetic immunityAgency certification Australian C-Tick N176 Korean RRLFCC verification RoHS MCV Environmental protectionPage Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewDB35.3 Series Serial ATA Product Manual, Rev. D Hot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H 159 160 ATA-reserved 0000H 254 255 Integrity word XxA5H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Presales Support InternetTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Sata DB35.3 Series Serial ATA Product Manual, Rev. D Page Seagate Technology LLC

ST3400820SCE, ST3300820SCE, ST3750840SCE, ST3250820SCE, ST3750640SCE specifications

Seagate’s series of hard drives, including the ST3320820SCE, ST3500830SCE, ST3750640SCE, ST3250820SCE, and ST3750840SCE, comprise a robust lineup designed for both consumer and professional use.

The ST3320820SCE model features a storage capacity of 320GB and operates at a rotational speed of 7200 RPM, allowing for faster data access and improved overall performance. This drive is equipped with SATA interface, providing higher data transfer rates and enhanced connectivity options. Its 8MB cache enhances read and write speeds, thus making it suitable for multitasking environments.

In comparison, the ST3500830SCE offers a larger capacity with 500GB storage. This drive is also based on the same 7200 RPM speed standard, ensuring optimal performance for both gaming applications and data-heavy tasks. The SATA interface remains a central feature, promoting seamless integration into a range of PC configurations.

The ST3750640SCE takes the storage capabilities further, offering a generous 750GB space. It shares similar technological advancements such as the SATA interface and 7200 RPM speed, making it ideal for users needing extensive storage for multimedia files, software applications, and backups. The reliable performance alongside its increased capacity makes it a favored choice among professionals.

The ST3250820SCE model is targeted towards those needing a balance between performance and cost-efficiency. With a 250GB capacity, this drive provides ample space for everyday usage while maintaining a robust 7200 RPM speed and 8MB cache. This makes it an ideal option for entry-level systems and general-purpose computing.

Lastly, the ST3750840SCE offers up to 750GB of space, similar to the ST3750640SCE, but also incorporates advanced technologies for enhanced reliability and durability. This includes features like Seagate's Smart Align technology, which optimizes the drive's performance by efficiently managing data, especially with modern 4K sector drives.

Overall, these Seagate models cater to a wide spectrum of users, from casual home users to professionals requiring reliable and high-performance storage solutions. With a combination of speed, capacity, and innovative technologies, they stand out as solid choices in the hard drive market.
Top Page Image Contents