Converting Wyse D Class to ThinOS | 5 |
Figure 3 Configuration options
3.Select the Configure the USB key to Copy/Pull or to Update/Push firmware option, and then click Next to open the Select the Configuration dialog box.
Figure 4 Update firmware options
4.Select the WTOS/Xenith/Xenith Pro operating system (OS) type option (note that OS Image, BIOS, and CMOS are selected by default).
5.Select the Update or Push Firmware operation to perform option.
6.Click Next to open the browse dialog box.
Figure 5 Browse for image file
7.Click Browse.