Wyse Technology 883681-08 Rev. E manual

Page 35

Setting Up the Thin Client

29

•No local Ethernet, Modem dialup only - Select this option if the thin client will access a network through a dial-up modem (for more information, refer to "Configuring Dialup Modem Access"and "Configuring Serial Communications."

•No local LAN, invoke PPPoE only - Select this option if the thin client will access a network through a PPPoE connection. For more information, refer to "Configuring PPPoE Access."

•Dynamically allocated over DHCP/BOOTP - Selecting this option enables the thin client to automatically receive (from the DHCP server) the following:

•All network settings, including its IP address and the location of the file server.

•A list of PNAgent/PNLite servers that may be used to obtain a list of published applications.

•A list of Windows domains that can be selected for use when authenticating a user for PNAgent/PNLite.

•An FTP user name and password to be authenticated when using non-anonymous FTP server access.

•A list of Rapport servers and the TCP port to be used when contacting those servers.

Note

The network administrator must configure the DHCP server to provide this information. Any value provided by the DHCP server will replace any information entered locally however, that locally entered information will be used if the DHCP server fails to provide replacement values.

If the thin client is to be used as an LPD server, DHCP cannot be used and a static IP address must be assigned (see “Configuring LPD Services” ).

•Statically specified IP Address - Select this option to manual enter the IP Address, Subnet Mask, and Default Gateway.

•IP Address - Must be a valid network address in the thin client server environment. The network administrator must provide this information.

•Subnet Mask - Enter the value of the subnet mask. A subnet mask is used to gain access to machines on other subnets. The subnet mask is used to differentiate the location of other IP addresses with two choices: same subnet or other subnet. If the location is other subnet, messages sent to that address must be sent through the Default Gateway, whether specified through local configuration or through DHCP. Ask the network administrator for this value.

•Default Gateway - Use of gateways is optional. Gateways are used to interconnect multiple networks (routing or delivering IP packets between them). The default gateway is used for accessing the Internet or an intranet with multiple subnets. If no gateway is specified, the thin client can only address other systems on the same subnet. Enter the address of the router that connects the thin client to the Internet. The address must exist on the same subnet as the thin client as defined by the IP address and the subnet mask. If DHCP is used, the address can be supplied through DHCP.

•DHCP Vendor ID - Shows the DHCP Vendor ID when the Dynamically allocated over DHCP / BOOTP option is selected.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Wyse Winterm 1 series, Based on Wyse Thin OS Users GuideCopyright Notices Thin Client Requirements Compliance This page intentionally blank Contents Using the Network Test Tools Using and Configuring Access ConnectionsOrganization of this Guide IntroductionAbout this Guide Wyse Technical SupportRelated Online Resources Available at Wyse Getting Started What Happens When You Turn on Your Thin ClientAccessing the Enterprise Servers Available Chapter Signing-on Changing Your PasswordUnderstanding Your User Profile Assigned Privileges Knowing Your Assigned Privileges and User ModeUnderstanding System Lock-down User ModesLogging Off and Shutting Down About the Session Services You Will UseDesktop example Using the DesktopViewing System Information Understanding the Window Display Modes Using the System Setup Submenu Using the Shortcut Menu and Desktop MenuAccessing Available Applications Accessing System InformationAccessing the Network Test Tools Accessing the PPPoE ManagerAccessing the Dialup Manager Accessing the Pptp ManagerConnect Manager High-privileged user example Using the Connect ManagerAbout Configuring ICA and RDP Connections Connection Settings ICA Server option Configuring ICA ConnectionsPage Connection Settings ICA Options tab Connection Settings RDP Connection tab Configuring RDP ConnectionsConnection Settings RDP Options tab Console Select to set the RDP connection with Console mode This page intentionally blank Setting Up the Thin Client System Preference General tab Setting System PreferencesSystem Preference Advanced tab Network Setup General tab Configuring Network SettingsPage Network Setup Name Servers tab Network Setup Servers tab Network Setup Reconnect options Wireless Setup Setting Up Wireless AccessDisplay Setup Selecting Display SettingsHz default 75 Hz 85 Hz Configuring Serial CommunicationsPrinter Setup Ports tab Setting Up PrintersPage Printer Setup LPDs tab Printer Setup SMBs tab Setting Up Windows NT4 Servers Configuring LPD ServicesSetting Up Windows 2000/2003 Servers Configuring Touch ScreensThis page intentionally blank Using Wireless Direct Access Using and Configuring Access ConnectionsUsing Ethernet Direct Access PPPoE Manager Configuring PPPoE AccessDialup Manager Configuring Dialup Modem AccessDialup Property Dialup Status Pptp Manager Configuring Pptp VPN AccessPptp Property Pptp Status Using Ping Using the Network Test ToolsTrace Route Using Trace RouteFigures Page Tables

1, 883681-08 Rev. E specifications

Wyse Technology has long been a leader in the field of cloud computing and virtualization, particularly with its impressive range of thin clients. Among its notable products is the Wyse 883681-08 Rev. E, a sophisticated thin client designed to meet the needs of organizations seeking efficient and scalable computing solutions.

The Wyse 883681-08 Rev. E is built on a robust architecture that includes advanced ARM processors, which ensure an optimal performance level while consuming minimal power. This feature is particularly valuable in environments that prioritize energy efficiency and cost-effectiveness. The device operates seamlessly with leading virtualization solutions such as Citrix, VMware, and Microsoft, making it a versatile option for businesses that rely on these platforms.

One of the standout features of the Wyse 883681-08 Rev. E is its lightweight and compact design. This allows for easier deployment across office environments while also maximizing desk space. The thin client is designed for quick and easy management, enabling IT teams to deploy software updates and security patches without requiring extensive on-site interventions. This ease of management is complemented by the device's impressive scalability; organizations can easily expand their infrastructure by adding more units as their workforce grows.

In terms of connectivity, the Wyse 883681-08 Rev. E supports multiple interfaces, including USB ports, Ethernet, and audio jacks. This ensures compatibility with a range of peripherals, allowing users to tailor their setups according to their unique needs. The device also features dual-display support, enabling users to enhance productivity by utilizing multiple monitors simultaneously.

Security is another focal point for the Wyse 883681-08 Rev. E. With features such as secure boot, encryption options, and smart card support, organizations can ensure that sensitive data remains protected at all times. This aligns with the increasing need for businesses to maintain robust security measures in an era where cyber threats are ubiquitous.

In conclusion, the Wyse Technology 883681-08 Rev. E thin client stands out as a highly efficient solution for organizations seeking to harness the power of virtualization. With its advanced technology, energy efficiency, comprehensive security features, and ease of management, it represents an ideal choice for businesses aiming to optimize their computing environments while also preparing for future growth.
Top Page Image Contents