Seagate ST340015A manual Description if bit is set to Bit

Page 43

Barracuda 5400.1 Product Manual, Rev. G

35

Note. See the bit descriptions below for words 63, 88, 93 and 94 of the Identify Drive data:

Description (if bit is set to 1)

Bit

Word 63

0Multiword DMA mode 0 is supported.

1Multiword DMA mode 1 is supported.

2Multiword DMA mode 2 is supported.

8Multiword DMA mode 0 is currently active.

9Multiword DMA mode 1 is currently active.

10Multiword DMA mode 2 is currently active.

Bit

Word 88

0Ultra DMA mode 0 is supported.

1Ultra DMA mode 1 is supported.

2Ultra DMA mode 2 is supported.

3Ultra DMA mode 3 is supported.

4Ultra DMA mode 4 is supported.

8Ultra DMA mode 0 is currently active.

9Ultra DMA mode 1 is currently active.

10Ultra DMA mode 2 is currently active.

11Ultra DMA mode 3 is currently active.

12Ultra DMA mode 4 is currently active.

13Ultra DMA mode 5 is currently active.

Bit

Word 93

131 = 80-conductor cable detected, CBLID above VIH 0 = 40-conductor cable detected, CBLID below VIL

Bit

Word 94

0–7 Current AAM setting

8–15 AAM Power on default

Image 43

Contents Page Page Page Page Contents Barracuda 5400.1 Product Manual, Rev. G Seagate Technology support servicesList of Figures Barracuda 5400.1 Product Manual, Rev. G Introduction Barracuda 5400.1 Product Manual, Rev. G Specification summary table Drive specificationsDrive specification ST340015A 50,000 Humidity SeaShield LBA mode Default logical geometryPhysical organization ATA Physical characteristicsTypical seek times msec Read Write Power specificationsSeek time Start/stop timesRead/write power and current Barracuda 5400.1 Product Manual, Rev. G Power consumptionSpinup power Seek modeBarracuda 5400.1 Product Manual, Rev. G Typical 5V startup and operation current profile Conducted noise Power-management modesActive mode Idle modeIdle and Standby timers Sleep modeEnvironmental specifications Ambient temperature Altitude Temperature gradientWet bulb temperature Humidity Relative humidityVibration Barracuda 5400.1 Product Manual, Rev. G ShockOperating shock Nonoperating shockModel Idle Quiet seek Performance seek Acoustic modeAcoustics Fluid Dynamic Bearing FDB motor acousticsPerformance Reference Test Description Level Standard ReliabilityElectromagnetic compatibility Agency certification Safety certificationKorean RRL FCC verification Barracuda 5400.1 Product Manual, Rev. G Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsCable select option Drive as master with a non-ATA-compatible slaveSlave Ultra ATA/100 cableDrive mounting MasterMounting dimensions-top, side and end view Barracuda 5400.1 Product Manual, Rev. G ATA interface ATA interface signals and connector pinsO pins and supported ATA signals EC H Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commands Identify Device command 0C5AH Word Description ValueXxxxH Xx3FH Description if bit is set to Bit 0CH Set Features commandF1H Report full capacity available Code in features Register A.R.T. command 4 S.M.A.R.T. commandsInternet MySeagate Seagate Technology support services Online ServicesPresales, Technical Support and Customer Service Automated Phone Services40Barracuda 5400.1 Product Manual, Rev. G Americas Seagate † USA/Canada/Latin America Support ServicesCall Center Toll-free Direct dial AmericasAfrica/Middle East Support Services European Support ServicesCall Center Asia/Pacific Support Services Barracuda 5400.1 Product Manual, Rev. G Index GMR Barracuda 5400.1 Product Manual, Rev. G 48Barracuda 5400.1 Product Manual, Rev. G Page Seagate Technology LLC

Related manuals

Manual 2 pages 30.5 Kb