Western Telematic Remote Power Boot Switch manual Operation

Page 9

RPB+; Remote Power Boot Switch -- User's Guide

Example 1: To set default On/Off conditions as follows:

ON: Plugs 1 and 5

OFF: Plugs 2, 3, and 4

The Power-Up Default String would be defined as "10001".

Example 2: To set default plug conditions as follows:

ON: Plugs 3, 4, and 5

OFF: Plugs 1 and 2

The Power-Up Default String would be defined as "00111".

5. Operation

The device connected to the Control Port must send ASCII characters at the same data rate as the RPB+. The unit accepts 8 bits no parity, or 7 bits even or odd parity, but will always answer back at 8 bits, no parity.

Access the RPB+ Command Mode as described in Section 4, Step 1. When the "RPB+>" prompt appears, the user may invoke the following commands.

Note:

●Commands are not case sensitive.

●Wait for the "RPB+>" prompt to appear before entering commands. The prompt will not re-appear until the previous command is complete.

●If an invalid command or parameter is entered, the RPB+ will respond with the "?" message.

1.Switch Plug(s) On: To power-on one or all of the five switched plugs, type /n ON [Enter]. Where "n" is a plug number from 1 to 5 and an asterisk (*) indicates the

command should be applied to all plugs.

2.Switch Plug(s) Off: To power-off one or all of the five switched plugs, type /n OFF [Enter]. Where "n" is a plug number from 1 to 5 and an asterisk (*) indicates the command should be applied to all plugs. Note that "OFF" can also be entered as "OF".

3.Boot Plug(s): To initiate a Boot cycle at one or all of the switched plugs, type /n BOOT [Enter]. Where "n" is a plug number from 1 to 5 and an asterisk (*) indicates the command should be applied to all plugs. Note that "BOOT" can also be entered as "B". The RPB+ will display a series of periods (dots) while the Boot cycle is in progress.

4.Status: To display the Status Screen, type /S [Enter].

file:///C/WEBPAGE/guides/rpbp/build/rpbpguid.htm (9 of 12) [3/9/2000 5:08:11 PM]

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Table of Contents Remote Power Boot SwitchIntroduction FeaturesList of Figures Typographic ConventionsUnit Description Front PanelBack Panel SetUp Switches Installation= Factory Setting Connecting to a ModemControl Port Connection Power Connection Start-Up / ConfigurationString Via Local PC Start your communications programRPB+ Power-Up Default String Operation On / OFF / Boot Examples Appendix A. SpecificationsPin Signal I/O RS232 PortAppendix B. Customer Service PowerWTI Customer Service Trademark and Copyright Information FCC StatementIrvine, California Toll Free U.S. & Canada Phone Fax Western Telematic, Inc

Remote Power Boot Switch specifications

The Western Telematic Remote Power Boot Switch is a powerful solution designed for remote management and control of electrical power. This device is particularly useful in industries where equipment needs to be powered on or off from a distance, providing facility managers and operators with increased flexibility and efficiency.

One of the main features of this power boot switch is its remote operation capability. Users can manage power from any location through a simple web-based interface or app, allowing for real-time monitoring and control. This feature is essential for organizations with multiple devices or sites, as it minimizes the need for on-site visits to manually reset or reboot equipment. By utilizing a secure network connection, users can access the power boot switch remotely, ensuring their critical systems are always operational.

The Western Telematic switch is built with advanced technologies that enhance its reliability and performance. It supports various communication protocols, including SNMP (Simple Network Management Protocol), Telnet, and SSH, allowing seamless integration into existing network management systems. This compatibility is crucial for enabling automated monitoring, alerts, and control over power states, thus reducing downtime and improving overall operational efficiency.

Another notable characteristic of the Remote Power Boot Switch is its robustness. Designed to withstand challenging environmental conditions, these devices come equipped with durable housings and components, making them suitable for both indoor and outdoor deployments. This durability is essential in preventing failures that could disrupt business operations.

Additionally, the switch features multiple outlets, typically with the capability to control each outlet independently. This functionality allows users to power cycle individual devices without affecting others, providing granular control over power management. The device also includes surge protection, ensuring that connected equipment is safeguarded against power fluctuations and electrical surges.

In conclusion, the Western Telematic Remote Power Boot Switch is an indispensable tool for organizations that require dependable and flexible power management solutions. With its remote operation capabilities, support for various communication protocols, robust design, and multiple outlet controls, it streamlines the management of electrical power, enhances equipment uptime, and ultimately contributes to greater operational efficiency in a variety of settings.
Top Page Image Contents