OSD Menu Functions
All the function settings for this multifunctional LCD monitor are controlled via the control keys located on the side of the monitor. To display the OSD main menu, press and hold the “Menu” keypad button on the control panel. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)
This LCD monitor has been adjusted to optimal settings before shipment. If needed, adjustments to the monitor settings can also be made using the OSD menu.
•Press and hold the “Menu” 
button to display the OSD.
•Press the ▲ or ▼ button to scroll through the
•Press the button to enter the
•Press the ▲ or ▼ button to select the function to be adjusted.
•Press the or buttons to change the current setting of the
•To go back to the previous menu, press the 
button. Changes are saved automatically.
•To exit the OSD menu press "Menu" 
again. It automatically will save any changes that have been made.
• To switch input, simply press "Menu” |
| . |
| Source |
| ||||
|
|
| ||
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Image Menu
Audio Menu
Color Menu
Miscellaneous Menu
Resolution & Frequency
NOTES:
•Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the OSD menu.
•Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.
•The icon color will change from gray to blue when a
10