Tape Operation

GENERAL INFORMATION ON CASSETTE TAPES

•For playback, use normal (low-noise) tape for best sound. (Metal or chrome tape is not recommended)

•For recording, use normal tape only.

•Do not use C-120 tapes, tapes with internal reels or poor-quality tapes because they can cause malfunctions.

•Before loading a tape into the cassette compartment, tighten the slack tape with a pen or pencil.

•Cassette have removable tabs which prevent accidental recording from taking place. Re- moving the tab on the top left side protects you from erasure. Cover the tab holes with adhesive tape to erase or record again.

CASSETTE PLAYBACK

1.Press the TAPE Button [13] to “TAPE” mode.

2.Press the STOP/EJECT Button [20]/[25] and insert a prerecorded cassette tape into the cassette compartment.

3.Close the cassette door [15]/[27].

4.Press the PLAYButton to start playback. Also, playback will stop automatically when the end of the tape has been reached.

FAST FORWARD REWIND

1.Press the FAST FORWARDButton [19]/[24] to advance the tape or press the REW Button [18]/[23] to rewind.

2.Press the STOP/EJECT Button [20]/[25] when the desired location has been reached.

NOTE: In FAST FORWARDand FAST REWIND mode, the tape will not automati- cally stop when it reaches the end.

INTERRUPT PLAYBACK

Press the PAUSE Button [21]/[26] during playback and press it again to resume playback.

RECORDING

•When recording important selections, be sure to make a preliminary test to ensure that the desired material is being properly recorded.

•Metal and chrome tapes cannot be used for recording.

RECORDING FROM RADIO (TUNER)

1.Press the TUNER/BAND Button [29] to “TUNER” mode.

2.Press the TUNER/BAND Button [29] to the desired band.

3.Tune a desired station.

4.Insert a cassette tape into the cassette compartment.

5.Press RECORD Button [16] which also engages the PLAYButton, to being recording.

6.Press the PAUSE Button [21] to suspend recording without deactivating the record mode. Press again to resume recording.