COBY electronic CXCD470 Beat CUT Switch, Recording from CD, Erasing Recorded Tapes

BEAT CUT SWITCH

If feedback (whistling noise) occurs when recording from AM broadcasts, set the BEAT CUT selector [46] to I or II whichever gives the best reception.

RECORDING FROM CD

1.Press the CD Button [14] to “CD” mode.

2.Place a compact disc in the CD compartment.

3.Insert a cassette tape into the cassette compartment.

4.Press the RECORD Button [16], the CD player will begin recording from first track or the first of the programmed track automatically. Otherwise, you can select a desired track by press FORWARD SKIP or BACKWARD SKIP [35].

ERASING RECORDED TAPES

1.Insert the tape to be erased into cassette compartment.

2.Press the TAPE Button [13] to “TAPE” mode.

3.Press the RECORD Button [16] to begin erasing.

DUBBING TAPE B: > TO TAPE A:

This unit enables you to duplicate a prerecorded tape to another tape by using the built-in double deck mechanisms. It is performed only one way, from the TAPE:B (playback) to TAPE: A (recording).

DUBBING AT NORMAL SPEED

1.Press the TAPE Button [13] to “TAPE” mode.

2.Insert a prerecorded cassette into TAPE B [15] and insert blank cassette into TAPE A [27].

3.Press the TAPE A PAUSE Button [26] and then press the RECORD Button [16].

4.Press the TAPE B PLAY Button [22] to start dubbing.

5.To stop the dubbing operation, press both STOP/EJECT Button [20]/[25] simultaneously.

DUBBING AT HIGH SPEED

This unit is equipped with a HIGH SPEED DUBBING system which allows duplication a prere- corded tape at approximately two-thirds the time of the duration at normal speed.

Press the HIGH SPEED DUBBING Switch [11] and follow the same procedure as instructed in

“DUBBING AT NORMAL SPEED”.

When dubbing a prerecorded cassette tape at HIGH SPEED in TAPE function, a chattering sound is heard.

12