Westinghouse LCM-17V8 user manual Installation, Attaching the Base Stand to the LCD Monitor

Page 10

Installation

1. Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and snap into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base.

2.Connect Audio and Video Cables to a PC

Connect one or all of the following into the back of the LCD Monitor

IMPORTANT: Before beginning, make sure all devices are turned off.

AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO-OUT port to the AUDIO-IN port on the LCD Monitor.

DVI-D CONNECTION: Connect a Digital DVI cable from your PC to the LCD Monitor DVI-D port. To plug a DVI cable into the port, remove the plastic cover below the port.

VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the LCD Monitor D-SUB port.

English

Image 10

Contents USER’S Manual Table of Contents Overloading Power Cord ProtectionPrecautions VentilationSafety Guidelines FCC Compliance StatementTo clean the case Cleaning the LCD MonitorTo clean the screen DisclaimerPower Saver Plug & PlayInstallation Package ContentsFront View of the LCD Monitor Blue NormalRear View of the LCD Monitor SUB VGAAttaching the Base Stand to the LCD Monitor InstallationConnect Audio and Video Cables to a PC Turn the Power On Connect Power CablesMounting the Monitor on a Wall That have been made Image Menu Audio Menu Color Menu Misc Menu Info Menu Quick Adjustments Text Mode Normal Display ModesSpecifications AppendixNo Image No PowerPower is on but No Screen Image Out Of RangeNo Sound Image is Not Centered size is not scaled correctlyColors are Not Correct Mounting the LCD Monitor on a WallWestinghouse Digital Electronics