Westinghouse LCM-17V8 user manual That have been made

Page 13

OSD Menu Functions

All the function settings for the LCD monitor are controlled via the control keys located on the bottom part of the front panel. To display the OSD main menu, press the “Menu” keypad button on the control keys. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)

The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the monitor settings can be made using the OSD menu.

Press the “Menu”

 

button to display the OSD.

 

 

Press the ▲ or ▼ button to select the function to be adjusted.

Press the X button to access the function to be adjusted.

Press the ▲ or ▼ button to select the sub-function to be adjusted.

Press the W or X buttons to change the current setting of the sub-function.

To go back to the previous menu, press the

 

button. Changes are saved

 

 

 

automatically.

To exit the OSD menu press "Menu"

 

again. It automatically will save any changes

 

 

English

that have been made.

Image Menu

Audio Menu

Color Temp. Menu

Misc Menu

Info Menu

Source

Resolution & Frequency

NOTES:

The OSD turns off several seconds after you stop pressing the buttons while performing an adjustment.

Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the menu.

Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.

The icon color will change from blue to white when a function is selected.

The following is a list of the OSD sub-menus for the LCD monitor:

11

Image 13
Contents USER’S Manual Table of Contents Precautions Power Cord ProtectionOverloading VentilationFCC Compliance Statement Safety GuidelinesTo clean the screen Cleaning the LCD MonitorTo clean the case DisclaimerPlug & Play Power SaverPackage Contents InstallationBlue Normal Front View of the LCD MonitorSUB VGA Rear View of the LCD MonitorAttaching the Base Stand to the LCD Monitor InstallationConnect Audio and Video Cables to a PC Connect Power Cables Turn the Power OnMounting the Monitor on a Wall That have been made Image Menu Audio Menu Color Menu Misc Menu Info Menu Quick Adjustments Display Modes Text Mode NormalAppendix SpecificationsPower is on but No Screen Image No PowerNo Image Out Of RangeColors are Not Correct Image is Not Centered size is not scaled correctlyNo Sound Mounting the LCD Monitor on a WallWestinghouse Digital Electronics