Compaq PCD-1 manual Troubleshooting, Symptom What to do

Troubleshooting

Symptom	What to do
Nothing shows on the display	> Make sure the batteries are installed.
when the Power button is	> Install fresh batteries.
pressed.
	> Make sure the power adapter is plugged into the proper connection.
The LCD backlight does not	> The backlight may not be visible in bright light. Check in a dark
illuminate when a button is	environment.
pressed.	> Check the Menu setting to make sure the backlight is turned on.
“NO DISC” is displayed on the	> Insert a CD.
LCD.	> Check to ensure that the CD is properly installed. The CD must be
	snapped all the way down into place with the correct side facing up.
	> CD is badly scratched or dirty. Replace or clean the CD.
“Hold is on!” is displayed on the	Displays when attempting to turn on the PCD-1 when the Norm/Hold
LCD.	switch on the side of the player is in the Hold position. Slide this switch
	to the Norm position before turning on the PCD-1.
Player turns on then shuts off.	Check to make sure the Norm/Hold switch is in the Norm position
	before turning on the PCD-1.
No sound.	> Make sure the Play/Pause icon on the LCD is solid. A flashing
	elapsed time indicates Pause mode. Press the Play/Pause button.
	> Increase the volume level by pressing the Volume Increase button.
	> Make sure the headphones are properly attached.
	> Look for a song title on the LCD display.
	> If the player is in Radio mode, make sure a radio station is tuned in.
No sound in one headphone.	> Make sure the headphone connector is fully inserted into the
	connector on the PCD-1.
	> Use another set of headphones (if available).
Remote control does not work.	> Make sure the PCD-1 power is on.
	> Install or replace the battery in the remote control.

COMPAQ IPAQ PCD-1 21