Toro Plus Series Satellite specifications Set Program Start Times

Page 6

Set Program Start Time(s)

This procedure will determine when each program will start during a 24 hour period. Note the following characteristics:

•Each program can have from 1 to 12 start times.

•Start times can be set to the minute.

•Program operation can be prevented for any of the 12 start times by selecting OFF (no start time).

•When operating in the Stand Alone mode, any new start times downloaded from the central will be ignored.

•When operating in the Central mode, new start times downloaded from the central will be utilized.

1.Press as needed to select the Program indicator.

2. Press

to select the Start Time indicator.

3.Press or to select the desired program number (1 – 16).

4.Press – Start time 01 will begin flashing and current start time will be shown.

5.Press or to select desired start time number (1 – 12).

6.Press – Hours digit(s) or “OFF” will begin flashing.

7.Press or to adjust hours digits up or down. (Observe for correct a.m./p.m. time.)

Note: If no start time is desired, select "OFF" – located between 11 p.m. and 12 a.m. (23:00 and 00:00). Skip steps 8 & 9 and continue at step 10.

Example shown: Program 1, start time 1 set to 2:30 a.m.

8.Press – Minutes digits will begin flashing.

9.Press or to adjust minutes digits up or down.

ENTER

10.Press to enter the information.

START

11.Repeat steps 5 – 10 for all desired start times for this program.

12.Press to select another program number.

13.Repeat steps 3 – 12 as required.

Start Time No.

Program No.

:

:

:

:

Current

Start Time

:AM

: AM

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Hardware Features Table of ContentsPower Specifications Fuses and Circuit BreakersController Components Selecting Control Options 6 5 4 3 2Set Satellite Operating Mode Before Programming the Controller…About the Controller’s Memory… Set Current Time and Day Set Station Run TimeSet Program Start Times Set Active Day Watering Schedules To Set a Calendar scheduleInterval Schedule To set an Interval scheduleSet Program Repeat and Soak Program Operation Pause and Cancel Cycle ModeManual Control Operations Syringe Mode To syringe all stations from 1 30 minutesTo syringe from 10% 99% of station run time Multi-Manual Mode Set Percent Adjust Set Satellite AddressSelf Test Reviewing Program InformationSpecial Functions InitializationTo Perform Radio Calibration Test Radio Calibration TestLink Monitor Wait 30 secondsLithium Battery installation optional TroubleshootingProblem Probable Cause Remedy ProcedureManual Output Switch Operation Power Indicator LampsRemoving and Installing 8-Station Modules Program Data Reference Form IntervalNetwork Ltctm Plus Series Satellite

Plus Series Satellite specifications

The Toro Plus Series Satellite is a cutting-edge irrigation controller that combines advanced technology with user-friendly features to enhance landscape management. Designed for professional and residential use, this series caters to a variety of watering needs, ensuring optimal performance while promoting water conservation.

One of the standout features of the Toro Plus Series Satellite is its intuitive programming interface. With a user-friendly display, users can easily navigate through various settings, customize irrigation schedules, and monitor system performance. This interface is designed to simplify the setup process, allowing users to program multiple zones tailored to the unique needs of different landscape areas.

The Toro Plus Series Satellite incorporates advanced weather data integration, giving it the capability to adjust watering schedules based on real-time environmental conditions. By utilizing local weather data, this intelligent system can prevent overwatering during rainy days or adjust schedules during drought conditions, thereby conserving water and promoting healthy plants.

An important characteristic of the Toro Plus Series is its precision irrigation technology. This feature utilizes advanced sensor technology to monitor soil moisture levels, ensuring that each zone receives the precise amount of water needed. By minimizing water waste and reducing runoff, the Toro Plus series significantly contributes to sustainable gardening practices.

Connectivity is another major aspect of the Toro Plus Series Satellite. With capabilities for remote access via smartphone applications, users can easily manage their irrigation systems from anywhere. This feature allows homeowners and landscape professionals to adjust settings, view system status, and receive alerts, further enhancing convenience and control.

Additionally, the Toro Plus Series is built with durability in mind. Constructed from robust materials, it is designed to withstand harsh weather conditions and ensure long-lasting performance. Its modular design allows for easy upgrades and expansions, making it a versatile choice for growing landscapes.

In summary, the Toro Plus Series Satellite combines advanced programming capabilities, weather integration, precision irrigation technology, and remote connectivity, all housed in a durable and user-friendly design. These features build an efficient irrigation solution that not only meets the demands of any landscape but also champions water conservation and sustainable practices. This makes the Toro Plus Series an ideal choice for anyone looking to enhance their irrigation efficiency while caring for their green spaces.
Top Page Image Contents