Toro Plus Series Satellite Set Active Day Watering Schedules, To Set a Calendar schedule

Set Active Day Watering Schedules

The active watering days for each program can be chosen using a Calendar schedule or an Interval schedule. The Calendar schedule enables active days to be selected within a 14-day (two week) cycle. The Interval Schedule enables active days to be selected by a specific interval, such as every day, every-other day, every-third day and so on – up to every twenty-ninth day.

Select the active watering days for each program using either a Calendar schedule (below) or an Interval schedule (on page 8).

Note the following programming characteristics:

•Only one watering day schedule (Calendar or Interval) can be utilized for each program.

•To prevent automatic operation of any program, all days in a Calendar Schedule can be deleted or Interval Day can be set to Off.

To Set a Calendar schedule:

1.Press as needed to select the Program indicator.

2. Press to select the Active Days indicator.

Schedule Type

(Calendar)

Program No.

3.Press or until the desired program number (1 – 16) is flashing.

4.Press – The schedule type will begin flashing.

5.Press or until CA (Calendar) is flashing.

6.Press – The current Calendar schedule is displayed and Sunday (Su) of week 1 is flashing.

7.Choose to select or delete the indicated (flashing) day.

•To select: Press – The day stops flashing and remains displayed and the next day starts flashing.

•To delete: Press – The day disappears and next day starts flashing.

8.Repeat step 7 to set the 14-day watering schedule.

Note: To prevent automatic operation of the program, delete all 14 days or, as an alternate method, select Interval “Off”. See page 8 for this procedure.

ENTER

9.Press to enter the information into controller memory.

START

10.Repeat steps 3 – 9 for all programs requiring a Calendar schedule.

Note: If an Interval watering schedule is not required, programming for automatic operation is now complete. When an automatic program starts, the displays will alternate between the time/day and program status. If two or more programs are operating concurrently, the display will alternate to show status of each program.

:

:

:

Su Mo We Fr

1 2 3 4 5 6 7 Week 1

: AM

:

Pgm # Sta #

Mo We Fr

89 10 11 12 13 14 Week 2

Fr

:

Sta Run Time

7