Teledyne 40, Power Supply instruction manual General Information, Features, Specifications

Page 5

SECTION 1

General Information

The Hastings Model 40 Power Supply is a combination power supply and digital readout monitor, for up to four Hastings Flow Instruments having the model number prefixes of HFM, ST, or FST and up to 2 of the HFM-D series. The gas conversion factor can be set individually for each channel by front panel mounted potentiometers. This allows meters calibrated for air to be used for other gases without recalibration. These controls provide for easy monitoring of the flow instruments with minimal time required to get the flow instruments on line.

1.1 Features:

Front panel dial-in gas conversion factors for each channel.

The power supply fuse is user-accessible from the rear of the instrument without disassembly of the case.

A rear panel terminal strip provides the user with analog output from flow instruments.

A3-1/2 digit LCD display monitors the flow instruments. Input voltage is internally switchable between 115 and 230 VAC.

Display can be set up to read directly in the units in which the flow instrument is calibrated.

1.2Specifications:

• Weight: Approximately 4 lbs.

• Dimensions: 3.47"(H) X 9.47"(W) X 7.19"(D) — see page 20.

•Meter: 3-1/2 digit LCD

•Power: 90-125/180-250 VAC 50 or 60 HZ

•Output: 15 VDC @ ±300 mA

•Use: 1 to 4 channels

•Scaling: Individual channel meter adjustment.

•Signal Output: 0-5 VDC into 2K Ohms minimum load. All four channels can be read simulta- neously.

•Feet and a stand are standard. They are easily removeable for rack mounting. (mtg screws can cause electrical shorts if reinstalled without feet and stand)

OPTIONAL CABLES:

•Type AF-(length)-AM for “D” connector

•Type CE-(length)-AM for edge connector

8, 25, 50, 100 ft. lengths available as separate item. Cables DO NOT have to be the same length.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Teledyne Hastings Manual Print History Table of Contents Page General Information FeaturesSpecifications Page Receiving Inspection Installation and OperationPower Requirements Electrical Connection Output VoltageOperation Correction Factor SwitchDisplay Channel SelectionRear Terminal Board FuseDisplay Adjustment Calibration and AdjustmentsRange Change Front of PanelCorrection Factor Channel Switch Selection Decimal PositionPage Calculation of Correction Factors For Mass Units Test Points TroubleshootingSymptom Troubleshooting ChartNon-Warranty Repair Policy WarrantyWarranty Repair Policy

40, Power Supply specifications

Teledyne Power Supply, 40 is a cutting-edge power solution designed to meet the demanding needs of various industries, including aerospace, defense, telecommunications, and industrial applications. This advanced power supply system boasts several key features and technologies that enhance its performance and reliability.

One of the primary characteristics of the Teledyne Power Supply, 40 is its robust design, capable of delivering high levels of power density while maintaining compact dimensions. This makes it ideal for applications where space is at a premium, such as in satellite systems and airborne electronics. The unit also employs advanced thermal management techniques, ensuring optimal performance even in challenging environments.

The Teledyne Power Supply, 40 is equipped with modular architecture, allowing users to customize the output voltage and current according to specific application requirements. This flexibility is complemented by a wide input voltage range, which provides compatibility with various power sources, making it suitable for both AC and DC input configurations.

One of the standout features of the Teledyne Power Supply, 40 is its integrated digital control system. This technology enables precise monitoring and control of output parameters, enhancing efficiency and performance. Users can easily configure settings via a user-friendly interface, often accessible through a remote connection. The system supports various communication protocols, facilitating seamless integration into existing control systems.

In terms of safety and reliability, the Teledyne Power Supply, 40 incorporates multiple protection mechanisms, including overvoltage, overcurrent, and thermal shutdown features. These safeguards ensure that both the power supply and the connected loads are protected against adverse conditions during operation.

Additionally, this power supply unit is designed to meet stringent military and aerospace standards, ensuring high levels of performance in harsh environments. Its rugged construction and thorough testing protocols contribute to its reliability, making it a trusted choice for mission-critical applications.

In conclusion, the Teledyne Power Supply, 40 is a sophisticated power management solution that combines flexibility, advanced technology, and reliable performance. Its modular design, precision control systems, and comprehensive safety features make it an ideal choice for demanding applications, setting a benchmark for power supply systems in today’s competitive market. Whether utilized in aerospace, industrial, or telecommunications sectors, the Teledyne Power Supply, 40 consistently delivers the performance and reliability required to meet the needs of modern technological demands.
Top Page Image Contents