Teledyne Power Supply, 40 instruction manual Troubleshooting Chart, Symptom

Page 16

Check these voltages prior to using the troubleshooting chart.

TP-6 is one lead of R27 and should be 2.00 VDC. The flow signals sent by flowmeters on channels 1 - 4 can be accessed by test points on one lead of C7 thru 10 respectively in the left rear of the main PC board. These do not have test point numbers, but their positions are screen printed on the PC board.

4.2 Troubleshooting Chart:

SYMPTOM:

Display has no indication regardless of the position of the Channel Selector

 

switch and all TP voltages are 0.0 VDC.

ACTION:

Ensure the unit is plugged into an operating source of AC power of the proper

 

voltage for the unit. Remove the fuse from the back of the unit. Replace it with

 

a 0.5 Amp 250 volt fuse if it has failed.

SYMPTOM:

TP-2 is 0, but TP-3 is correct.

ACTION:

The positive voltage regulator (U1) has failed; replace it.

SYMPTOM:

TP-3 is 0, but TP-2 is correct.

ACTION:

The negative voltage regulator (U2) has failed replace it.

SYMPTOM:

All Correction factors are approximately 0 or out of range.

ACTION:

Check TP-6 (one end or R27). If this is not 2.00 VDC replace U3 (AD580

 

voltage reference).

SYMPTOM:

Correction factors not displayed when CORRECTION FACTOR switch

 

depressed or the factors are displayed regardless of the postion of the

 

CORRECTION FACTOR switch.

ACTION:

The analog switch (U6) has failed; replace it.

SYMPTOM:

The decimal point is stuck in either the flow position or in the position used by

 

the correction factor.

ACTION:

The decimal point analog switch (U8) has failed; replace it.

SYMPTOM:

TP-3 and TP-2 are both low but non-zero.

ACTION:

Check to see if the power supply source selector switch (S2) is in the proper

 

position for the AC supply being used.

Page 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Teledyne Hastings Manual Print History Table of Contents Page Specifications FeaturesGeneral Information Page Power Requirements Installation and OperationReceiving Inspection Output Voltage Electrical ConnectionCorrection Factor Switch OperationDisplay Channel SelectionFuse Rear Terminal BoardCalibration and Adjustments Display AdjustmentRange Change Front of PanelChannel Switch Selection Decimal Position Correction FactorPage Calculation of Correction Factors For Mass Units Troubleshooting Test PointsTroubleshooting Chart SymptomWarranty Repair Policy WarrantyNon-Warranty Repair Policy

40, Power Supply specifications

Teledyne Power Supply, 40 is a cutting-edge power solution designed to meet the demanding needs of various industries, including aerospace, defense, telecommunications, and industrial applications. This advanced power supply system boasts several key features and technologies that enhance its performance and reliability.

One of the primary characteristics of the Teledyne Power Supply, 40 is its robust design, capable of delivering high levels of power density while maintaining compact dimensions. This makes it ideal for applications where space is at a premium, such as in satellite systems and airborne electronics. The unit also employs advanced thermal management techniques, ensuring optimal performance even in challenging environments.

The Teledyne Power Supply, 40 is equipped with modular architecture, allowing users to customize the output voltage and current according to specific application requirements. This flexibility is complemented by a wide input voltage range, which provides compatibility with various power sources, making it suitable for both AC and DC input configurations.

One of the standout features of the Teledyne Power Supply, 40 is its integrated digital control system. This technology enables precise monitoring and control of output parameters, enhancing efficiency and performance. Users can easily configure settings via a user-friendly interface, often accessible through a remote connection. The system supports various communication protocols, facilitating seamless integration into existing control systems.

In terms of safety and reliability, the Teledyne Power Supply, 40 incorporates multiple protection mechanisms, including overvoltage, overcurrent, and thermal shutdown features. These safeguards ensure that both the power supply and the connected loads are protected against adverse conditions during operation.

Additionally, this power supply unit is designed to meet stringent military and aerospace standards, ensuring high levels of performance in harsh environments. Its rugged construction and thorough testing protocols contribute to its reliability, making it a trusted choice for mission-critical applications.

In conclusion, the Teledyne Power Supply, 40 is a sophisticated power management solution that combines flexibility, advanced technology, and reliable performance. Its modular design, precision control systems, and comprehensive safety features make it an ideal choice for demanding applications, setting a benchmark for power supply systems in today’s competitive market. Whether utilized in aerospace, industrial, or telecommunications sectors, the Teledyne Power Supply, 40 consistently delivers the performance and reliability required to meet the needs of modern technological demands.
Top Page Image Contents