Glossary

ACPI (Advanced Configuration and Power Interface): a power management specification that allows the operating system to control the amount of power distributed to the computer’s devices. Devices not in use can be turned off, reducing unnecessary power expenditure.

AGP (Accelerated Graphics Port): a PCI-based interface which was designed specifically for demands of 3D graphics applications. The 32-bit AGP channel directly links the graphics controller to the main memory. While the channel runs at only 66 MHz, it supports data transmission during both the rising and falling ends of the clock cycle, yielding an effective speed of 133 MHz.

ATAPI (AT Attachment Packet Interface): also known as IDE or ATA; a drive implementation that includes the disk controller on the device itself. It allows CD- ROMs and tape drives to be configured as master or slave devices, just like HDDs.

ATX: the form factor designed to replace the AT form factor. It improves on the AT design by rotating the board 90 degrees, so that the IDE connectors are closer to the drive bays, and the CPU is closer to the power supply and cooling fan. The keyboard, mouse, USB, serial, and parallel ports are built-in.

Bandwidth: refers to carrying capacity. The greater the bandwidth, the more data the bus, phone line, or other electrical path, can carry. Greater bandwidth, then, also results in greater speed.

BBS (BIOS Boot Specification): is a feature within the BIOS that creates, prioritizes, and maintains a list of all Initial Program Load (IPL) devices, and then stores that list in NVRAM. IPL devices have the ability to load and execute an OS, as well as provide the ability to return to the BIOS if the OS load process fails for some reason. At that point, the next IPL device is called upon to attempt loading of the OS.

BIOS (Basic Input/Output System): the program that resides in the ROM chip, and provides the basic instructions for controlling your computer’s hardware. Both the operating system and application software use BIOS routines to ensure compatibility.

Buffer: a portion of RAM which is used to temporarily store data, usually from an application, though it is also used when printing, and in most keyboard drivers. The CPU can manipulate data in a buffer before copying it, all at once, to a disk drive. While this improves system performance --- reading to or writing from a disk drive a single time is much faster than doing so repeatedly --- there is also the possibility of losing your data should the system crash. Information stored in a buffer is temporarily stored, not permanently saved.

i500opx specifications

Tyan Computer, known for its commitment to high-performance server solutions, offers the i500OPX, a powerful server board designed to meet the demanding requirements of modern data centers. The i500OPX is built on the Intel Xeon Scalable processor family, supporting multiple CPUs that provide high core counts and multithreading capabilities. This architecture allows the i500OPX to handle intensive workloads, making it suitable for applications ranging from virtualization to big data analytics.

One of the standout features of the i500OPX is its extensive memory support. The motherboard can accommodate up to 6TB of DDR4 memory across 12 DIMM slots, enabling significant bandwidth and capacity. This is particularly beneficial for memory-intensive applications that require rapid access to large data sets. The board also supports Intel Optane memory, which enhances performance by accelerating storage applications and providing fast caching.

In terms of storage, the i500OPX supports a variety of configurations including SATA, SAS, and NVMe interfaces. This versatility allows users to implement a mix of traditional spinning drives and high-speed SSDs, optimizing performance while maintaining flexibility. Additionally, the i500OPX features multiple PCIe Gen 3 slots, enabling users to expand the server’s capabilities with GPUs or additional network cards.

Networking is another critical component of the i500OPX’s design. The motherboard includes support for advanced networking technologies, such as 10GbE and even 25GbE Ethernet options, ensuring that data can be transferred rapidly between the server and other connected hardware. This is essential for modern cloud computing and enterprise networking environments, where low latency and high throughput are paramount.

The i500OPX also emphasizes reliability and management. It is equipped with Tyan’s Advanced Server Management (ASM) technology, which provides remote management capabilities, monitoring, and alerts for system health, making it easier for IT administrators to ensure operational uptime.

In summary, the Tyan Computer i500OPX is a robust server platform that combines powerful computing performance, extensive memory and storage options, and advanced networking features. With its emphasis on scalability and reliability, the i500OPX is an ideal solution for enterprises looking to enhance their infrastructure and meet the challenges of today’s data-driven environments. Whether deployed in a cloud, enterprise, or high-performance computing environment, the i500OPX stands out as a reliable choice for demanding applications.