Tyan Computer i500opx instruction

PCI-to-PCI bridge: allows you to connect multiple PCI devices onto one PCI slot.

Pipeline burst SRAM: a type of RAM that can maintain it’s data as long as power is provided to the memory chips. In this configuration, SRAM requests are pipelined, which means that larger packets of data are sent to the memory at one time, and acted upon quickly. This type of SRAM operates at bus speeds higher than 66MHz.

Pipelining: improves system performance by allowing the CPU to begin executing a second instruction before the first is completed. A pipeline can be likened to an assembly line, with a given part of the pipeline repeatedly executing a set part of an operation on a series of instructions.

PM timers (Power Management timers): software timers that count down the number of seconds or minutes until the system times out and enters sleep, suspend, or doze mode.

PnP (Plug-n-Play):a design standard that has become ascendant in the industry. Plug-n-Play devices require little set-up to use. Novice end users can simply plug them into a computer that is running on a Plug-n-Play aware operating system (such as Windows 98), and go to work. Devices and operating systems that are not Plug-n-Play require you to reconfigure your system each time you add or change any part of your hardware.

PXE (Preboot Execution Environment): one of four components that together make up the Wired for Management 2.0 baseline specification. PXE was designed to define a standard set of preboot protocol services within a client, towards the goal of allowing networked-based booting to boot using industry standard protocols.

RAID (Redundant Array of Independent Disks): a way for the same data to be stored in different places on many hard drives. By using this method, the data is stored redundantly, also the multiple hard drives will appear as a single drive to the operating system. RAID level 0 is known as striping, where data is striped (or overlapped) across multiple hard drives, but offers no fault-tolerance. RAID level 1 is known as mirroring, which stores the data within at least two hard drives, but does not stripe. RAID level 1 also allows for faster access time and fault-tolerance, since either hard drive can be read at the same time. RAID level 0+1 is both striping and mirroring, providing fault-tolerance, striping, and faster access all at the same time.

RAIDIOS: stands for RAID I/O Steering, a type of RAID technology from Intel. RAIDIOS is a specification used to enable an embedded I/O controller, embedded on the motherboard, to be used as just an I/O controller or to be the I/O component of a hardware RAID subsystem. The RAIDIOS circuit allows an I/O Processor (either embedded on the motherboard or on an add-in card) to configure the I/O controller and service the I/O controller’s interrupts. The I/O controller and the I/O Processor together are two of the primary components of a hardware RAID subsystem.

i500opx specifications

Tyan Computer, known for its commitment to high-performance server solutions, offers the i500OPX, a powerful server board designed to meet the demanding requirements of modern data centers. The i500OPX is built on the Intel Xeon Scalable processor family, supporting multiple CPUs that provide high core counts and multithreading capabilities. This architecture allows the i500OPX to handle intensive workloads, making it suitable for applications ranging from virtualization to big data analytics.

One of the standout features of the i500OPX is its extensive memory support. The motherboard can accommodate up to 6TB of DDR4 memory across 12 DIMM slots, enabling significant bandwidth and capacity. This is particularly beneficial for memory-intensive applications that require rapid access to large data sets. The board also supports Intel Optane memory, which enhances performance by accelerating storage applications and providing fast caching.

In terms of storage, the i500OPX supports a variety of configurations including SATA, SAS, and NVMe interfaces. This versatility allows users to implement a mix of traditional spinning drives and high-speed SSDs, optimizing performance while maintaining flexibility. Additionally, the i500OPX features multiple PCIe Gen 3 slots, enabling users to expand the server’s capabilities with GPUs or additional network cards.

Networking is another critical component of the i500OPX’s design. The motherboard includes support for advanced networking technologies, such as 10GbE and even 25GbE Ethernet options, ensuring that data can be transferred rapidly between the server and other connected hardware. This is essential for modern cloud computing and enterprise networking environments, where low latency and high throughput are paramount.

The i500OPX also emphasizes reliability and management. It is equipped with Tyan’s Advanced Server Management (ASM) technology, which provides remote management capabilities, monitoring, and alerts for system health, making it easier for IT administrators to ensure operational uptime.

In summary, the Tyan Computer i500OPX is a robust server platform that combines powerful computing performance, extensive memory and storage options, and advanced networking features. With its emphasis on scalability and reliability, the i500OPX is an ideal solution for enterprises looking to enhance their infrastructure and meet the challenges of today’s data-driven environments. Whether deployed in a cloud, enterprise, or high-performance computing environment, the i500OPX stands out as a reliable choice for demanding applications.