CS196 EN 17/2/06 7:28 PM Page 15
Settings
Showing Demonstration
Press DEMO/DIMMER to turn on/off demonstration mode. The demonstration scrolls through all display operations.
Setting the Clock
1.Press and hold CLOCK on the remote control until the hour flashes on the display.
2.Press 
or 
to set the hour and then press CLOCK to shift to minute digits.
3.Press 
or 
to set the minute.
4.Press CLOCK twice to save and quit settings.
Note:
When system is ON, you can press CLOCK to display the current time for about 2 seconds.
Setting the Timer
1.Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display.
ON
2:00
2.For setting time, press 
or 
to set the hour and then press TIMER to shift to minute digits.
3. Press |
| or |
| to set the minute. |
| ||||
|
|
4. Press TIMER to change to Timer Off setting | EN | ||||
with clock time flashing. Repeat steps 2 & 3 for | |||||
| |||||
timer off time setting. |
| ||||
|
|
|
|
| |
| OFF |
|
| ||
| 0:00 |
|
| ||
|
|
|
|
| |
|
|
|
|
| |
5.Press TIMER to select source. Press 
or 
to select TUNER / REC TUNER / DISC / USB /
PLAYER.
If TUNER REC is selected, press 
or to select the preset station.
PRE 01
6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.
VOL 10
7. Press TIMER to save and quit settings.
The timer is automatically activated once timer setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon 
is displayed when timer is activated.
8