Clarion DB346MP Basic Operations Adjusting the bass, Adjusting the treble, Adjusting the balance

Basic Operations

Adjusting the bass

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “0”. (Adjustment range: –7 to +7)

Adjusting the treble

1.Press the [A-M] button and select “TREB”.

2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –7 to +7)

Adjusting the balance

1.Press the [A-M] button and select “BAL”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

Adjusting the fader

1.Press the [A-M] button and select “FAD”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

Turning the screen saver function on or off

This unit is provided with the screen saver func- tion. You can turn on or off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is on.

Press the [SS] button while keeping the [BND] button pressed, to turn the screen saver func- tion on or off.

Switching the Clock Display

Press and hold the [BND] button, and then press the [DISP] button to switch between the opera- tion mode and the clock display.

Setting the Clock

1.Press and hold the [BND] button, and then press the [DISP] button to display the clock display.

2.Press and hold the [BND] button, and then

press the [DISP] button for 2 seconds or longer.

3.Press the [a] or [d] button to toggle HOUR and MINUTE selection. Then turn the [ROTARY] knob clockwise to increase hour / minute or counterclockwise to decrease hour / minute.

4.Press the [BND] button, then clock is set.

English

Note:

•Bass and Treble can only be adjusted when the “Z-enhancer” is off.

Turning on/off MAGNA BASS EX

To adjust the MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗The factory default setting is off. Press and hold the [A-M] button for 2 second or longer to turn the MAGNA BASS EX and “M-B EX” in the display lights on or off.

Note:

•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.

•If you remove the vehicle's battery for a check or repair, the clock will be reset, so you must set it again.

Illumination dimmer function

When the illumination line of this unit is con- nected with the car-side illumination signal line, the display illumination of this unit dims in con- nection with turning on the car-side illumination.

DB245 11