9. TROUBLESHOOTING
Problem | Cause | Solution |
Power does not turn on. | Fuse is blown. | Replace with a fuse of the same amperage. If |
(No sound is produced.) |
| the fuse blows again, consult your store of |
|
| purchase. |
|
|
|
| Incorrect wiring. | Consult your store of purchase. |
|
|
|
Compact disc cannot be | Another compact disc is | Eject the compact disc before loading the new |
loaded. | already loaded. | one. |
|
|
|
Sound skips or is noisy. | Compact disc is dirty. | Clean the compact disc with a soft cloth. |
|
|
|
| Compact disc is heavily | Replace with a compact disc with no scratches. |
| scratched or warped. |
|
|
|
|
Sound is bad directly after | Water droplets may form on | Let dry for about 1 hour with the power on. |
power is turned on. | the internal lens when the car |
|
| is parked in a humid place. |
|
|
|
|
Nothing happens when | The microprocessor has | Turn off the power, then press the [RELEASE] |
button are pressed. | malfunctioned due to noise, | button and remove the DCP. |
Display is not accurate. | etc. | Press the reset button for about 2 seconds with |
|
| a thin rod. |
DCP or main unit connectors | Wipe the dirt off with a soft cloth moistened with |
are dirty. | cleaning alcohol. |
English
DB245 15