2.2Installing motherboard components
4.Place the CPU in the CPU socket, ensuring that pin 1 is located as shown in the following illustration.
pin 1 |
5.Press the CPU locking lever back down to secure the CPU in the socket.
6.Repeat steps three to five for the second CPU.
7.Apply thermal grease to the top of the CPUs and place the CPU heatsinks on the CPUs.
8.Tighten the four screws to secure the heatsinks in place as shown below.
Note: CPU heatsinks must be removed to install or remove memory modules.
Chapter 2: Setting up | 19 |