2.1Rack Mounting
After installing the necessary components, the Tank GT25 can be mounted in a rack using the supplied rack mounting kit.
Rack mounting kit
Sliding Rails x 2:
Sliding Brackets x 4 (Front x 2, Rear x 2)
Mounting Ears x 2
Screws Kit x 1
Mounting Brackets x 4
2.1.1Installing the Server in a Rack
Follow these instructions to mount the GT25 into an industry standard 19" rack.
NOTE: Before mounting the Tank GT25 in a rack, ensure that all internal components have been installed and that the unit has been fully tested. Maintenance can be performed on the unit while in a rack but it is preferable to install the device in a fully operational condition.
Screws List (including screws for SMDC)
A:Flat
B:
C:
D:
E:
F:
G:13.5mm
G
F
E
D
C
B
A
Chapter 2: Setting Up | 21 |