Wireless Access Point Model
Product Specifications
Standards Compliance | IEEE802.3 | |
| IEEE802.3u | |
| IEEE802.11a 5GHz Band at rates up to 54Mbps | |
| IEEE802.11b 2.4GHz Band at rates up to 11Mbps | |
| IEEE802.11g 2.4GHz Band at rates up to 54Mbps | |
| IEEE802.1x/RADIUS Authentication | |
| IEEE802.1f for Interoperability | |
| RFC1213 SNMP MIB I and MIB II | |
| EN 301 893, EN 300 | |
| EN 301 | |
| EN 60 950 for Safety | |
| FCC Part 15 for EMC | |
| CE 0560 | |
Protocol | CSMA/CA | |
Network Architecture Type | Infrastructure | |
Media connectors | • | |
| • 9w | |
Frequency Bands | 802.11b/g 2.4GHz to 2.4897GHz | |
| 802.11a 5.150GHz to 5.850GHz | |
Antenna Type | Dual fixed diversity antennae | |
| comply with FCC regulations for IEEE802.11a) | |
Transmit Power 802.11a | 200mW (+23dBm) - Full | |
| 100mW (+20dBm) | |
| 50mW (+17dBm) | |
| 20mW (+13dBm) | |
| 10mW (+10dBm) | |
Transmit Power 802.11b/g | 100mW (+20dBm) - Full | |
| 50mW (+17dBm) | |
| 20mW (+13dBm) | |
| 10mW (+10dBm) | |
Typical Range – 802.11a | Indoor 20m at 54Mbps | |
| Outdoor 40m at 54Mbps | |
Typical Range – 802.11b/g | Indoor 35m at 54Mbps | |
| Outdoor 70m at 54Mbps | |
Data Rate | Reduces from 54Mbps when subject to noise etc. | |
Encryption Keys | 64 Bit, 128 Bit and 152 Bit WEP | |
Authentication | IEEE802.1x to RADIUS with EAP, TLS, | |
Status Indicators | • | Power |
| • | LAN |
| • | 802.11a |
| • | 802.11b/g |
Configuration Support | Web, Telnet, Console and SNMP | |
Code Update | Web or TFTP methods | |
Power Consumption | Typically 8W | |
Supply Voltages | +12v DC from AC adapter on the local power port | |
| 48v DC on the spare pairs of the Ethernet cable | |
Physical Size | 225mm x 185mm x 40 (w d h) excluding antennae | |
Weight | 1kg |
|
Environmental | 0’C to +50’C, 5% to 95% Relative Humidity |
PL0356 | ©2003TycoElectronics | Issue 1 |