Vantec NexStar MX manual System Requirements

Page 6

3. System Requirements:

Intel Pentium II 266 MHz-compatible Microsoft Windows 2000/2003/XP/Vista.

1.USB port, FireWire 400(1394a) port, or FireWire 800 (1394b) port.

2.For USB 2.0 speeds, the system must support USB 2.0 specifications.

3.For FireWire 800(1394b) speeds, the system must support 1394b specifications.

4.For FireWire 400(1394a) speeds, the system must support 1394a specifications.

5.CD Rom drive (if drivers are needed)

6.64MB RAM or higher.

Mac PowerPC or Intel Core Duo processor

&greater.Mac OS 9.x & greater. (PowerPC processor) / Mac OS 10.4 & greater.(Intel Core Duo processor)

1. USB port, FireWire 400(1394a) port, or FireWire 800 (1394b) port.

2. For USB 2.0 speeds, the system must support USB 2.0 specifications.

3.For FireWire 800(1394b) speeds, the system must support 1394b specifications.

4. For FireWire 400(1394a) speeds, the system must support 1394a specifications.

5. CD Rom drive (if drivers are needed)

6. 64MB RAM or higher.

System Requirements

4

Image 6
Contents Page Package Contents Table of Contents Introduction Features/Specifications NexStar MX Dual 3.5 Sata HDD EnclosureSystem Requirements Interface Information Installation Installing two hard drives into the NexStar MX DualInstallation Power Connecting the NexStar MX Dual to your computer Driver Installation Windows 2000/2003/XP/VistaMac OS 9.0 or later Creating a New Partition / Formatting The Hard Drive For Windows 2000/2003/ XP/ Vista UsersIndividual Mode Right-click the red-squared block and select Initialize Disk Page Jbod Mode For Mac UsersRAID 0 Mode Settings. -Q RAID Mode Selection Individual Mode:Jbod Mode Jbod Mode:Two equal hard drives: Two unequal hard drives:Disconnecting The NexStar MX Dual Why is my computer not showing the full Size of my hard drive ?Troubleshooting /FAQ / Warranty Contact