Vantec NexStar MX manual Installation

Page 9

(3)Slide the first HDD into the drive caddy then insert the HDD into the SATA connector.

( Figure 5-C )

( Figure 5-C )

(4)Slide the second HDD into the drive caddy then insert the HDD into the SATA connector. ( Figure 5-D )

( Figure 5-D )

5)Secure the hard drives onto the drive caddy with the provided screws on both sides in order to secure the hard drive and the drive caddy. ( Figure 5-E )

( Figure 5-E )

Installation

7

Image 9
Contents Page Package Contents Table of Contents Introduction NexStar MX Dual 3.5 Sata HDD Enclosure Features/SpecificationsSystem Requirements Interface Information Installing two hard drives into the NexStar MX Dual InstallationInstallation Power Connecting the NexStar MX Dual to your computer Driver Installation Windows 2000/2003/XP/VistaMac OS 9.0 or later For Windows 2000/2003/ XP/ Vista Users Creating a New Partition / Formatting The Hard DriveIndividual Mode Right-click the red-squared block and select Initialize Disk Page For Mac Users Jbod ModeRAID 0 Mode Settings. -Q Individual Mode: RAID Mode SelectionJbod Mode: Jbod ModeTwo unequal hard drives: Two equal hard drives:Disconnecting The NexStar MX Dual Size of my hard drive ? Why is my computer not showing the fullTroubleshooting /FAQ / Warranty Contact