UNICOM Electric GEP-32005T, GEP-32008T specifications Network Application

Page 10

4. Network Application

This section provides a sample of network topology in which the MicroGST/5 and 8 switches are used. In general, the MicroGST switches are designed as high-bandwidth backbone switches.

You can use the MicroGST switches to connect servers, switches, workstations, and PCs to each other by connecting these devices directly to the Switch. The Switch automatically learns node addresses, which are subsequently used to filter and forward all traffic based on the destination address.

For enterprise networks where large data broadcasts are constantly processed, this switch is an ideal link between departmental switches and the core switch. All workstations can connect to departmental switches and those switches are then connected to the MicroGST/5 and 8 switches. Now all the devices in this network can communicate with each other. Connecting servers to the core switch is important because it allows each workstation to access the server’s data.

This switch is designed for backbone connectivity. In the above example, servers, department switches, and workstation are directly connected to the MicroGST switches.

7

Image 10
Contents MicroGST/5 Content Page Features IntroductionPackage Contents Front and Rear Panel Hardware DescriptionW x H LED Indicators Descriptions of each LED statusStatus Description Power100/1000 Power On InstallationAttaching Rubber Feet Network Application Technical Specification LED