Panasonic KX-TG6842 Making calls during a power failure, Answering calls during a power failure

Making/Answering Calls

Panasonic Ni-MH battery performance (supplied batteries) during power back-up mode

When the batteries are fully charged, operating time of the handset in power back-up mode varies depending on usage.

–Continuous use of the handset in power back-up mode: 1.5 hours max.

–Continuous use of the handset other than a handset in power back-up mode: 2 hours max.

–Not in use in power back-up mode: 2 hours max.

Note:

RActual battery performance depends on usage and ambient environment.

Making calls during a power failure

nWhen only 1 handset is registered:

1 Lift the handset and dial the phone number.

2Within 1 minute, place the handset on the base unit.

R Wait until speakerphone is turned

on automatically and the call is made.

3When the other party answers the call, keep the handset on the base unit and talk using the speakerphone.

4When you finish talking, press MOFFN.

Note:

RIn step 2, if you do not place the handset on the base unit within 1 minute, the power back-up mode turns off. In this case, press MOFFN on the handset and dial the phone number. Then try again from step 2.

nWhen 2 or more handsets are registered: You should leave one handset on the base unit for supplying the power, and use another handset for making calls. For the operation, please see “Making calls”, page 16.

Note:

RDuring a call with the handset placed on the base unit (power back-up mode), the call

may be disconnected if you touch the handset. In such case, try to call back.

RThe range of the base unit is limited during a power failure. Please use the handset close to the base unit.

Making a call using the redial list

nWhen only 1 handset is registered:

1 Lift the handset.

2 MEN REDIAL

3 MbN: Select the desired phone number.

4 Within 1 minute, place the handset on the base unit.

R Wait until speakerphone is turned

on automatically and the call is made.

nWhen 2 or more handsets are registered: You should leave one handset on the base unit for supplying the power, and use another handset for making calls.

For the operation, please see “Making a call using the redial list”, page 16.

Making a call using the shared phonebook

There must be at least 2 handsets registered to the base unit in order for the shared phonebook feature to be used during a power failure.

You should leave one handset on the base unit for supplying the power, and use another handset for making calls.

For the operation, please see “Finding and calling from a phonebook entry”, page 23.

Answering calls during a power failure

nWhen only 1 handset is registered:

1 When the unit rings, keep the handset on the base unit and press MN or MZN.

R Speakerphone is turned on.

2When you finish talking, press MOFFN.

20For assistance, please visit http://www.panasonic.com/help

TG684x7x(en)_1127_ver021.pdf 20

2012/11/27 18:16:46