Panasonic KX-TG6845 Storing unwanted callers, Programming, n From the caller list Handset

Call block (Caller ID subscribers only)

MOFFN

5

Changing the start and end time Handset / Base unit

1 MMENUN#237

2 Continue from step 3 for handset or step

3 for base unit, “Turning silent mode on/ off”, page 32.

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name, “Handset 1” to “Handset 6” is displayed.

Handset

1 MMENUN#104

2 Enter the desired name (max. 10 characters; see the character table, page 22).

R If not required, go to step 3.

3 MSAVEN

4 MbN: Select the desired setting. a MSELECTN 2 times

Programming

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 33).

–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 34).

When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 34).

Important:

RWhen the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list

(page 37) with after the call is disconnected.

RYou can program this setting using either the base unit or one of the handsets.

Storing unwanted callers

You can store up to 250 phone numbers in the call block list.

Important:

RWe recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

n From the caller list:

Handset

1MCN CID

2MbN: Select the entry to be blocked.

R To edit the number: MMENUN a MbN: “Edit” a MSELECTN

Press MEDITN repeatedly until the phone number is shown in the 10-digit format. And then, press MSAVEN. Go to step 5.

3MMENUN

4MbN: “Save CID” a MSELECTN

5 MbN: “Call block” a MSELECTN

6 MbN: “Yes” a MSELECTN

7Edit the phone number if necessary (24 digits max.).

8MSAVEN a MOFFN

Base unit

1MCIDN

For assistance, please visit http://www.panasonic.com/help 33

TG684x7x(en)_1127_ver021.pdf 33

2012/11/27 18:16:47