|
|
| Programming | |
Settings | Code |
| ||
Caller ID edit | – | <On> Off | #214 | 38 |
(Caller ID number auto |
|
|
|
|
edit) |
|
|
|
|
Change language | – | <English> | #110 | 14 |
(Display) |
| Español |
|
|
Main menu: 
“Cust. Support”
Operation
Displaying customer support Web address.
Code
#680
–
*1 If you program these settings using one of the units, you do not need to program the same item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4 If you subscribe to a distinctive ring service (such as
*5 If you select one of the melody ringer tones, it will continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*7 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*8 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*9 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the waiting call.
*10 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good.
*11 This setting is available when you have the key detector
*12 For models with supplied key detectors, the display shows “1: Detector1”.
*13 If you register 2 or more key detectors.
*14 If you have 2 or more key detectors.
For assistance, please visit http://www.panasonic.com/help | 31 |
TG684x7x(en)_1127_ver021.pdf 31
2012/11/27 18:16:47
