Programming
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Handset / Base unit
nScrolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next
4 Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
nUsing the direct command code
1 MMENUN a Enter the desired code. Example: Press MMENUN#110. For available code:
–Handset: see page 26.
–Base unit: see page 30.
2Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
Note:
RIn the following table, < > indicates the default settings.
RIn the following table, 
indicates the reference page number.
RDisplay menu order and
Display menu tree and direct command code table
nHandset
Main menu: 
“Phonebook”
Operation | Code |
|
Viewing the phonebook entry. | #280 | 23 |
Main menu: 
“Caller list”
Operation | Code |
|
Viewing the caller list. | #213 | 37 |
Main menu: 
“Answering device”
Settings | Code |
| ||
Play new msg. | – | – | #323 | 42 |
(msg.: message) |
|
|
|
|
26For assistance, please visit http://www.panasonic.com/help
TG684x7x(en)_1127_ver021.pdf 26
2012/11/27 18:16:46
