Useful Information

Problem

I fully charged the batteries, but

still flashes,

is displayed, or

the operating time seems to be shorter.

Cause/solution

RClean the battery ends ( , ) and the charge contacts with a dry cloth and charge again.

RIt is time to replace the batteries (page 10).

Making/answering calls, intercom

Problem

is displayed.

Noise is heard, sound cuts in and out.

The handset does not ring.

The base unit does not ring.

I cannot make a call.

I cannot make long distance calls.

Cause/solution

RThe handset is too far from the base unit. Move closer.

RThe base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit.

RThe handset is not registered to the base unit. Register it (page 35).

RYou are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference.

RMove closer to the base unit.

RIf you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details.

RThe ringer volume is turned off. Adjust the ringer volume (page 17, 28).

RSilent mode is turned on. Turn it off (page 32).

RThe ringer volume is turned off. Adjust the ringer volume (page 17, 30).

RSilent mode is turned on. Turn it off (page 32).

RThe dialing mode may be set incorrectly. Change the setting (page 15).

RMake sure that you have long distance service.

54For assistance, please visit http://www.panasonic.com/help

TG684x7x(en)_1127_ver021.pdf 54

2012/11/27 18:16:49

Page 54
Image 54
Panasonic KX-TG6873, KX-TG6872, KX-TG6842, KX-TG6845, KX-TG6844, KX-TG6843 Making/answering calls, intercom