Printing using Xerox utilities and lpr utilities (DOS and UNIX)
Example The following example shows the command for displaying the contents of the print queue submitted to the printer controller “rushmore”:
lpq
lpq command in UNIX
Use the lpq command to show the content of the printer queue for a specific virtual printer, including the printer status, the status of the UNIX print daemon, and the name of the host from which the job originated.
If you do not use options to specify a particular job number or user name, the system displays information on all jobs in the default print queue. Refer to the lpq command man page for more information.
To display the status of a print queue, enter the lpq command and its options on the command line using the following syntax:
Syntax lpq <options>
Options The options are case sensitive. You may enter more than one option at a time.
•
Specifies the queue you want to view. If you do not enter this option, the system displays information from the queue of the printer specified in the UNIX printer variable. If the printer variable is not set, the system uses the queue for the default printer.
•job #
Displays information on a specific job.
•username
Displays only jobs submitted by a particular user.
•
Displays the queue information in long format, including the stapling and plex options.
Guide to Submitting Jobs from the Client |
