Xerox 721P90350 manual Installing the Decomposition Service DOS Tools on the PC

Setting up workstations

Installing the Decomposition Service DOS Tools on the PC

To install the Decomposition Service Tools, insert the diskette for DOS workstations. Create a directory and copy the tools from the diskette as shown:

mkdir c:\dptools

cd c:\dptools

copy a:*.*

The example shows how to copy all tools. However, you may need to install only some of the available tools. Copy only the needed files to your

drive.

NOTE: If you also install Windows Decomposition tools ensure that they are not installed to the same directory as the DOS tools.

Refer to the Decomposition Service and Tools Guide for more information on using Decomposition Service.

Removing DOS client software

This section describes the procedure for removing the print command client software. You may need to perform this procedure prior to updating software, or to correct corrupted file installation on the platform. The steps are shown below.

C:/> cd \usr\xerox\NPS/IPS\client

C:/> del cconf

C:/> cd \usr\xerox\NPS/IPS\client\bin

C:/> del listq.exe

C:/> del print.exe

C:/> del listjob.exe

C:/> cd ..\man

C:/> del listq

C:/> del listjob

C:/> del print

C:/> cd ..\gpj

C:/> del xrxgpj1.ps

C:/> del xrxgpj2.ps

2-6 Guide to Submitting Jobs from the Client