Printing using Xerox utilities and lpr utilities (DOS and UNIX)
•
Specifies the action to take when there is a mismatch between the highlight color you specify and the dry ink color loaded in the printer. The default for the hcm option is “ignore.” The optional actions are as follows:
–“abort”
Requests that your job abort if the highlight color you specify is not loaded at the printer.
–“ignore”
Requests that the available dry ink color be used to print your job, regardless of whether you specify that color.
–“operator”
Suspends the job in an “ineligible” state while the operator loads the color dry ink you specify.
If you specify “operator,” the job prints automatically after the operator loads the correct dry ink; however, the job does not print until this task is completed. The job shows in the list of documents at the printer controller, with “Ineligible” listed as the job status.
•
Specifies mapping a
Since some information is lost in mapping, the color rendering options allow you to determine what qualities are the most important to preserve:
–pictorial
Maintains the pictorial quality as follows:
Colors with a hue matching the map color are not changed.
Colors with a hue close to the map color are rendered with color, but with a saturation level that decreases as the hue shifts away from the map color.
Colors with a hue complementary to the map color are produced in shades of gray.
Guide to Submitting Jobs from the Client |
